A keychain is what you can make from plastic bottle caps. DIY oven badges DIY plastic keychain

Nice little thing, isn't it? This is a keychain, a phone accessory or just a pincushion, you can use it however you want! It is very easy to make, with a minimum of time and materials. But she's lovely!

We will need:

• stopper from a plastic bottle with a coupling;
• a little synthetic filler, you can get by with cotton wool;
• piece beautiful fabric;
• cardboard;
• hot glue;
• beautiful braid;
• needle;
• a thread.

Take a piece of beautiful fabric, in our case a small piece of cross stitch - this will be the front side of the keychain. Pull it onto the cork from the convex side.

Place the ring on top like a hoop, securing the fabric to the cork.

This is the preparation you have at this stage.

Let's prepare the element back side keychain Cut a circle out of cardboard to fit the size of the cork. Cover with fabric.

Gather the edges of the fabric with a running stitch and tighten the thread so that the edges gather in the center of the circle.

Trim the fabric on the cork a little larger than the outline and tuck it inside. Fill the cork cavity with cotton wool or other filler. Cover the top with the back panel and hand stitch along the edge. Connect both parts together.

Glue a strip of beautiful braid along the seam line using hot glue. Add a loop of gold cord or twisted thread. All is ready! If you want to use it as a pincushion, then add the filler immediately in the first step between the front side fabric and the surface of the lid. And only then secure the ring on top.

You can make not only a keychain, but according to the site, you can even make earrings and a bracelet. But it’s interesting if you make a panel))

Taken from the American site

The end result looks like this:

But you can also make bracelets and keychains like these :)

So, let's begin:
For this craft we use plastic packaging (by the way, you can use a plastic lid from sour cream or kefir plastic jars).

At the moment it is transparent plastic. You can also use any polystyrene packaging or plate.
Check the PS6 label on the packaging to make sure you are using polystyrene material.

1. Draw your design on a flat piece of plastic (as seen in the picture, with a felt-tip pen)

2. Continue drawing your entire design, but don't go over the border or edge as that part will be cut off.

3. Try to make coloring pages on plastic spaced apart from each other.

4. Also outline the flower designs with a contrasting outline, but on the other side of the plastic
This will create a stereoscopic effect and will not allow the marker colors to mix

5. Cut the plastic around the design. Cut to leave an even edge. Leave enough edge as the edge will shrink as it heats up.

6. Use a hole punch to make holes in the part you want to have as the top of the design.

7. Use aluminum foil that has already been used (it may be wrinkled). Place it on a baking sheet and heat the oven to 325°

8. Place your plastic on the foil and

Working with plastic is a pleasure. There are so many ideas that come up with this material, and it’s quite easy to implement them. Take, for example, a keychain mobile phone or keys. After all, I want it to be interesting and original, and even better, funny. You can make bright caramel on a stick! Let's take a closer look at how to make a plastic keychain.

Materials required for work:

Plastic 5 colors;
- stationery knife;
- nail polish (if not, then you can take a glossy nail polish, but only transparent);
- scissors;
- 1 toothpick;
- polyethylene file;
- accessories for a keychain.

Progress.
We cover the work surface with a plastic file, it is convenient to work on. Use a utility knife to cut off the plastic different color a small piece at a time. By the way, choose bright, colorful shades, then the finished product will be tempting and interesting.

We knead the plastic with our hands (you can work with gloves) until it becomes soft and pliable for modeling. From each color of plastic we make a long thin “sausage”.

Then we twist all 5 sausages together and scroll to create a rope.

We twist this rope so that it becomes a little thinner; you can swing the rope a little with your fingers on the file. We cut off the ends, they are still uneven.

Now we make a beautiful curl from multi-colored plastic rope. We twist it in a circle, lightly pressing each new row to the previous one.

The result is such a multi-colored curl.

We pierce the caramel with a special pin. And on the other side we attach a stick - half a toothpick.

Now the plastic needs to be baked. We act according to the instructions on the packaging. In this case, the plastic should be baked in the oven for 20 minutes at 110C. Read what it says on your package, as baking times may vary. Don't forget to line the baking tray with baking paper. It is advisable to periodically check the product in the oven; if you press lightly with a stick and the plastic is not pressed through, then it is ready.

You probably immediately throw them in the trash bin - plastic packaging, in which we bring home cakes, ready-made salads from the supermarket, cookies... But don’t rush to get rid of them. With this trick you can turn trash into an adorable masterpiece.

Need to:

• plastic box
• scissors
• hole puncher
• colored permanent markers

Let's start:

Take a clean package and cut out the bottom (flat part).

You can choose any picture at your discretion, the main thing is that it is easy to draw. For example, a character from everyone’s favorite cartoon about Winnie the Pooh. Keep in mind that at the end the figure will be reduced by about 70%, which means that the figure will need to be quite large to begin with. We copy the picture onto plastic.

Now we color the picture and use a hole punch to make a hole above the top of the picture. We cut along the contour, grabbing a small “loop” with a hole on top.

Place the plastic piece on baking paper and “bake” for 2-3 minutes at 165 °C. The heat will cause the plastic to shrink and curl, but don't worry, it will straighten out again in the end.

Once baked, the little plastic figurines will not only be smooth, but also thick and sturdy. Now you can use them to make such a charming bracelet.

Once again the whole process will be shown in the video:

Sets of such plastic blanks with drawings are even sold in some children's stores - children are delighted with this transformation. But why spend money if everything is at hand? You can choose any patterns, motifs and colors. Now what should have simply rotted in a landfill will be pleasing to the eye for a long time. Beautiful and environmentally friendly!

Crafts from plastic bottles is an excellent, useful and interesting hobby, because bottle plastic is a fairly versatile and easy-to-work material that any needlewoman can turn into a beautiful and useful household item.

If we can use the top of the bottle and the bottom to create decorative flowers - interior decoration, then the remaining plastic can be used to make smaller flowers, which are perfect for creating thread curtains or an original key ring with your own hands.

What we need:

Operating procedure:

1. Cut off the middle part of the bottle using a stationery knife or scissors.

2. Transfer the flower from the stencil to the plastic.

3. Cut out a flower from a plastic bottle along the contour.

4. Carefully remove irregularities and sharp corners using fire.

The decorative part for crafts made from plastic bottles is ready! We continue our work by cutting out several of the same blanks.

Painting plastic flowers acrylic paint or regular varnish for nails.

We make a hole in the center of the flower using a soldering iron. You can start assembling the keychain!