How to make the lightest weapons out of paper. Paper origami firearm diagram

Do-it-yourself toys are doubly pleasant to use in games. Children treat the results of their labors with care and are proud of the work done. It turns out that you can also make a weapon out of paper using the origami technique, and it will look like a real one. Both a novice craftsman and a child can easily cope with assembling a wide variety of equipment for war games, because most models do not require layouts and templates, but rather plain paper and visual instructions.

In this article we will tell you how to assemble paper origami for beginners - ninja weapons and firearms models that do not require special skills.

Using the origami technique, ninja weapons are made from paper different ways, depending on its type and size. As a result, it turns out to be quite strong, light and safe, so that the crafts can be used in a toy fight without fear of one of the children getting hurt. The materials you will need are white and colored paper sheets.

Most quick option, which even a beginner can make, is a four-pointed throwing star.

Prepare one square sheet and scissors, make two modules according to the diagram, then connect them together. There is no need to glue anything.

Using the same principle, you can assemble a more voluminous eight-pointed star:

• Fold eight identical modules as shown in the diagram.
• Combine them with each other, placing each subsequent module in the pocket of the previous one.
• Then tuck the end of the first module into the pocket of the last one - the star is ready!

And here is how a large transforming throwing shuriken is made. With such a bladed weapon, not only the child, but also the father will be enthusiastic about ninjas. Shurikens look best in contrasting colors: blue, black or red and white.

Follow the instructions carefully:

• Make eight identical rectangular rhombuses from square blanks.
• Connect them one by one.
• Transform the throwing star by carefully moving it to the center and back.

See how to make an origami weapon out of paper, a sword reminiscent of Leo the Ninja Turtle's trident: assembled from just one sheet. The process is quite complex and labor-intensive, requiring care and diligence.

It’s easier to make an elegant katana with a sheath; even a preschooler can cope with this task if he assembles the craft together with his dad, carefully following the sequence of movements outlined in the diagram.

Japanese combat knife - kunai. At the base it has two identical square elements that fold together to form a point. The handle is rolled up from a separate sheet twisted into a tube. A strong connection is ensured with tape, but you can use transparent or thick white tape. At the last stage, a ring is attached to the handle. The kunai can be coated with silver or golden varnish or foil - this will make the craft more durable and beautiful, especially if you depict the shadow of the notch in the center of the blade.

You can diversify samurai wars with nunchucks - for fans of Mikey the Turtle:

• Roll two cylinders from A4 sheets with a diameter of approximately 5-7 cm.
• Secure the edges with adhesive tape along the entire length.
• Make the same cylinders from old newspapers and magazines, carefully push them inside the “pipes”.
• Take a thick thick rope, wrap it around both cylinders, and use special silicone glue to fix it. Secure the ends with additional tape.
• Connect the finished nunchuck parts with twine. First, run the rope along each workpiece and stretch it inside the cylinders, then tie it.

Firearms ammunition

Firearms can also be made using the origami technique. Adult craftsmen collect real masterpieces.

The most basic pistol can be made in literally five minutes:

• Fold the two edges of the square sheet over.
• Fold the resulting rectangle in half.
• Bend one of the edges diagonally.
• Bend the top edges down.

Another assembly method - from two blanks - allows you to make an elegant pistol with a loop in the middle.

Is it possible to assemble a weapon using the origami technique from paper that shoots toy bullets? Yes, and there are several options. Additional materials you will need are adhesive tape, cardboard (for greater strength), an awl and regular rubber bands. The bullets are the same thin rubber bands or cylinder tubes twisted from leaves - shooting with such devices is safe, convenient and fun.

A hunting rifle is assembled in much the same way, only the barrel will be long and the handle will be more hollow.

Another common type of weapon is a revolver. Simple scheme its production is presented below. You can experiment and try to make complex models using multi-colored cardboard and some additional materials. This entertainment is more for adults, but the craft itself will be an excellent gift for a little boy.

Making ammunition for toy wars is an exciting activity for boys of all ages and their serious adult dads. This is an exciting way to spend an evening or weekend together. Together with your son, choose what you want to make, prepare required material, follow the photo and video instructions, invite the neighbors' kids and organize real wars.

In order to make a gun out of paper, you will need two strips of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes. One of the pipes will serve as the muzzle of our pistol, and the other will be its handle.

2. Bend the parts of the future pistol in half.

3. Take a short piece and fold its ends into reverse side from the holes.

4. Take the long piece and pull it through the short loop.

5. Our pistol is assembled.

How to make a revolver out of paper?

In order to make it from paper, you will need two A4 sheets.

1. Take an A4 sheet and fold it along the wide side 6-7 times to form a tube.

2. Bend the resulting tube in half.

3. Bend the ends of the workpiece with holes at an angle of 120 degrees.

4. The barrel of the gun and its handle are ready.

5. Fold a sheet of A4 paper in half and cut into equal parts. For the drum we only need one part. Take it and roll it along the wide side 6-7 times to get a tube.

6. This tube will serve as a drum for our revolver.

7. Wrap the resulting tube around the barrel blank with the handle several times.

8. Bend the ends sticking out in front inside the revolver and insert them into the slot of the revolver drum.

9. Fold the remaining part of the A4 sheet in half and cut it. Roll one part of the sheet along the long side into a tube. Roll the other part along the short side into a tube.

10. Insert the resulting tubes into the revolver blank.

11. The cowboys' weapons are ready.

How to make a gun out of paper?

In order to make a gun, you will need two rectangular sheets of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes.

2. Bend the resulting tubes in half and iron the fold with your hand.

3. Take a long piece and bend part of it inward so that a protruding corner is formed. Bend the ends of the short workpiece at angles of 120 degrees.

4. Insert the ends of the long piece with the holes into the resulting loop of the short piece and pull them with a little force to secure.

5. The hunting rifle is done.

Paper crafts are ideal for spending time together with your child. He is developing fine motor skills, fantasy. Below we will tell you how to do some of them.

Making a gun

The picture shows a diagram of the gun and instructions to follow. Cardboard is best for a gun. Find a model of the future toy, try to find a well-drawn image. Make a preliminary template using plain paper, using double paper for the “left” and “right” sides of the gun. After making the template, transfer it to cardboard and cut it out. Now let's make the gun fire. To do this you will need a thin elastic band. Cut the rectangular side that is parallel to the end of the trunk. You need to bend this side inward and pull the elastic band onto the trunk, making cuts on the sides. The cartridges are made of paper in the shape of balls. In order for the gun to fire, you need to pull the rubber band with your thumb. The gun can be decorated, the child will like it.

Simple pistol

Take a rectangular sheet, bend it in half, and bend the right and left sides inward. Repeat this procedure 2 more times. Now take a leaf square shape and repeat the previous steps. From the first sheet we will make a handle. Fold the form in half and unfold it, divide it into 3 parts. Bend the right side down 90 degrees, repeat the same with the left side. Place both pieces together. The handle is done!
The barrel came from a square sheet. Connect it to the handle. The pistol is ready.

Shuriken

Shuriken is a weapon of Japanese ninja. Boys will really like this toy. Take 2 sheets in the shape of a square. They need to be bent horizontally. Having straightened them, bend the two halves of the sheet towards the center so that they mirror each other. After which you need to bend the corners diagonally (they need to be bent on 2 sheets in different directions). You will receive a blank that looks like two triangles. Place the pieces one on top of the other. By threading the corners of the first into the pockets of the other part on both sides, you will receive a shuriken. Good luck!

Video lessons

Origami weapons are an attractive activity not only for boys, but also for connoisseurs various kinds weapons, fascinated by the art of creating paper figures.

You can make edged weapons (knives, blades, swords) and firearms (pistols, shotguns, revolvers) from paper. Special templates for origami weapons are not needed; everything is made from paper squares and rectangles. Such crafts can be used as toys or props for productions and costume parties. Paper cannot be used to injure anyone, and if broken, it is easy to reassemble the sword or pistol from a suitable sheet.

Most of the presented master classes contain assembly diagrams that are easy to understand for beginners and children.

Speaking about ninja weapons, one cannot help but recall shuriken - a traditional Japanese melee weapon in the shape of a star with several rays-blades. Typically, an origami shuriken is folded from two paper squares and has four corners. Shuriken is easy to fold using modular technology origami. Beginners can also cope with this task.

Shuriken with four arms

This master class suggests making two types of shuriken - with 4 and 8 rays. For a traditional shuriken you will need one single-color square or two multi-colored rectangles, scissors and a little time.

How to make origami shuriken from one square. You need to bend the square in half and cut it along the fold. Bend the resulting rectangles lengthwise.

Bend the corners on each workpiece as shown in the picture (mirror image). Fold them again mirror to each other and turn them over.

To connect the resulting origami figures, place one module on top of another crosswise and tuck the free corners of one module (fold along the lines shown) into the pockets of the other. Turn the origami workpiece over and also tuck the free ends of one piece into the pockets of the other.

Shuriken with eight arms

An 8-pointed shuriken consists of 8 squares - future modules. Shuriken can be one-color, two-color or multi-colored. To assemble an 8-pointed origami shuriken, you need to follow these steps step by step: bend the square crosswise diagonally and unfold it. Align the left side with the diagonal fold.

Fold the top side of the square back along a diagonal line. Fold the side along the red line, aligning points C and B, as shown in the photo. Turn the origami workpiece on its side and bend it in half along the red line, aligning the green lines.

Fold the bottom corner - the first module is ready.

Repeat steps 1-6 with the remaining 7 squares to make 8 origami modules.

Start combining all the modules: peel back the top layer of the module and insert another into its pocket.

Tuck the previously folded edge into the pocket of the attached figure.

Connect the remaining modules in the same way.

After attaching the last part, turn the “ninja weapon” over and tuck the end of the first part into the pocket of the last one.

More complex origami shuriken figures can be assembled from the modules. The photo below shows a few ideas:

In addition to shuriken, ninjas rarely do without a special combat knife - a kunai. It is proposed to make it according to the diagram and video below:

Another cold weapon made of paper is the ninja sword. detailed instructions assembly is presented in the video.

Video: Origami sword for real ninjas

Firearms

MK is dedicated to creating various models of firearms with your own hands using the origami technique.

The simplest pistol can be easily made from a square sheet. To do this, you need to wrap the edges on both sides to form a rectangle and bend it in half. Then bend the edge of the workpiece diagonally inward - you get a handle. To form the muzzle, bend the top edges down.

A more elegant pistol is assembled from two rectangles. To do this, you need to perform the following steps step by step.

I don’t want to deny the popularity of origami at all. Almost everyone can learn how to make paper crafts. And, probably, there is no person who has not folded a paper boat or airplane at least once. All these simple models can be considered the first steps in mastering the art of origami.

Those who are interested in such things have most likely asked themselves the question more than once: “How to make weapons and more complex fakes out of paper?” After all, such a souvenir can be made right in front of the child, and then together we can engage in the most interesting transformation of a completely flat sheet of paper into three-dimensional shapes.

The simplest pistol

It is believed that various fakes, or rather their production, are great for spending time with children. The child will develop motor skills and imagination. It also promotes attentiveness and perseverance.

For a boy, it is quite possible to do simple origami for the first time. A paper weapon, such as a pistol, is made of two parts.

To do this, you need to bend the rectangular sheet in half. Its right and left sides bend inward. The procedure for folding the sides is repeated two more times. Then the same actions are performed with a square-shaped sheet.

After this, the weapon handle is made from the first element. The form is folded in half, unfolded and divided into three parts. The right piece bends down 90°, and the same thing happens with the left piece. The components of the parts are put together and the result is a handle.

The trunk itself is a former square sheet of paper. It is connected to the handle, and the paper origami “Weapon” is ready.

A sophisticated paper gun that can shoot

Origami "Pistol" is great entertainment and relaxation at the same time. The activity itself is available to anyone, anywhere and is super economical. You can use it to keep yourself or your child busy, for example, while waiting in line to see a doctor.

For this you will need paper and nail scissors. As for the paper itself, it is better to use cardboard. It is more durable and will not deform so quickly. But, in principle, any paper is suitable for origami.

And yet, how to make a weapon out of paper? This problem can be solved by reading the step-by-step instructions.

The process of making origami "Weapons"

First, the A4 sheet is folded lengthwise several times. This is the barrel of the future product. Then the pistol grip is made in the same way. It should be a little wider.

Both pieces are smoothed out and the smaller piece is superimposed on the larger one. The lower workpiece is divided in half visually. Alternately, the right and left sides are bent towards the center of the product. After this, the part is folded towards the center again.

Use scissors to make a small hole at the base of the pieces. A new sheet of paper turns towards itself short side and bends to its middle. The resulting part is the trigger. The part of the sheet that is not used is cut off. The element itself is folded in half and pushed into the gap, which is made at the handle.

The halves of the thin workpiece are threaded into the pockets that are formed at the wide part. The edges are folded carefully to ensure even corners. If necessary, excess is trimmed off the trigger.

Then another sheet of paper is taken. Its width is the width of the handle. The last edge of the paper weapon model is folded inward. It can be glued with tape to obtain a more even and beautiful pen pistol

Finally, the last sheet is taken and the same actions are performed with it as with the trigger. The first edge of the manufactured part is bent to the left so that the corner remains outside. This corner is cut off. The blank is threaded into the back of the barrel - and the gun is ready.

In order for the weapon to be fired, a rubber band for money is put on the barrel and bullets are made from paper.

Weapons of real ninjas

The art of origami makes it possible to make not only flowers, boats and airplanes from paper. It can be used to make various types of weapons, such as the “ninja star”.

Shuriken is a type of throwing weapon. It was used by legendary ninjas. By the way, they were quite seriously interested in mysticism and therefore applied various mysterious signs and hieroglyphs to their weapons. All this helped them in battles. On this paper weapons You can also depict ancient hieroglyphs. Then the child will certainly not remain indifferent.

Scheme and assembly process

To work, you only need one sheet to make a paper weapon. Its diagram is needed for better and more understandable assembly.

The paper is folded in half. Along the line where it is folded, it is cut into two strips. Each piece is bent lengthwise. Then, following the origami pattern, corners are made on the elements.

The result is two mirror components. The left one is turned over to the other side and overlapped with the right one. The triangular shapes of the bottom piece are then tucked under the center edges of the top pieces.

The figure turns over. The same actions are performed with the remaining seven corners. After these steps, the question of how to make a weapon out of paper can be considered closed. After all, shuriken is also a weapon with a very interesting and long history.

Samurai knife

In addition to shooting weapons, you can make a samurai knife. Kunai is a tool originally from Japan. In its shape it is somewhat similar to a fish. Quite widely used on the farm. But if the need arose, it was used as a formidable throwing weapon.

This craft is created from ordinary paper, and if everything is done carefully and accurately, then the question of how to make weapons from paper will definitely not arise.

The process of creating an original knife

First, two elements are made of paper. Excess ends can be removed with scissors. Stationery supplies allow you to make a more accurate cut on a product such as a paper weapon. The diagram will help you avoid getting confused during the assembly process.

The square sheet is folded diagonally. The resulting triangle is folded in half. The figure turns to its original position. After this, each of the corners is folded so that the edge can coincide with the fold line at the center.

The part is folded in half along the central fold strip. The ends of the paper are tucked into a pocket on one side of the folded element. This is the edge of a knife.

After the part is completed, the handle is made. To do this, fold a sheet of paper diagonally, then make a flattened tube out of it. It is then connected to the “blade” itself. The corners are folded towards the center and secured with tape for a stronger connection.

Finally, the final touch is made: a round ring on the knife handle. It is attached, and the origami toy can be used.

Children can also be involved in the work, so that later, if they want to make such a product, they will not have the question of how to make a weapon out of paper. And if desired, the child can always do crafts on his own or with friends.

Origami as a small achievement in art

Each, even the simplest model, is small achievement in mastering the art of paper origami. Schemes (weapons, for example) are used to more clearly implement various models.

To engage in this type of creativity, it is not at all necessary to spend a lot of money, because all you need is paper. At the very beginning, it may seem unrealistic and very difficult. But in fact, the activity is very exciting, and if you use certain patterns and rules, origami will perhaps turn into a favorite hobby for the whole family.

Today you will find out How do set weapons from paper. Naturally, we will need scissors, tape or glue as tools. In addition to the above, of course, we will need the ability to carefully work with paper, as well as patience.

Making weapons out of paper

Before you start make weapons out of paper, read the instructions carefully.

Making a paper gun

You will need two strips of paper of different lengths.

Paper gun folding diagram

1. Fold the strips along the long side several times to create long tubes.
2. Fold the blanks in half.
3. For a short piece, bring the ends inward.
4. Insert the long piece into the loop of the short one.
5. The gun is ready.

Making a revolver out of paper

To make a revolver, we need four rectangular paper sheets of different sizes.

Folding diagram of a paper revolver

1. Fold the larger rectangle several times along the long side to form a tube.
2. Fold the blanks in half.
3. Turn the ends of the workpiece at an angle outward.
4. The base is ready.
5. Fold the middle rectangle several times along the long side to form a tube.
6. A blank “drum” appeared.
7. Wrap the base of the revolver with the blank from step 6.
8. Wrap the ends of the workpiece remaining in front back and insert them into the slots for fastening.
9. Roll two small rectangles into a tube.
10. Insert the “barrel” into the base blank.
11. The revolver is ready.

Making a gun out of paper

To complete the model you will need two paper strips of different lengths.

Model for your collection.
CAR-15 (Colt Automatic Rifle-15) - Adopted as the XM-177E1 Commando. Since the early 60s, Colt’s Manufacturing Company began actively offering the Colt AR-15 rifle for adoption by the American army. In mid-1964, a whole range of different options were developed on its basis, the most interesting of which was a short carbine.

Model for your collection.
FN SCAR - A weapon system developed by the American division of the Belgian company FN Herstal to participate in the competition to create a new machine gun for US SOCOM soldiers in 2003.
In December 2004, this system was declared the winner of the competition, and the rifles are currently entering service with the US Rangers.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
One of the reasons why the Mauser pistol became popular among revolutionaries, White Guards and bandits during the Civil War was its enormous, at that time, power.

Model for your collection.
AK and its modifications are the most common small arms in the world. According to available estimates, up to 1/5 of all small firearms on Earth belong to this type (including licensed and unlicensed copies, as well as third-party developments based on AK). According to many experts, it is the standard of reliability and ease of maintenance.
Print on a printer, on A4 sheets of matte thick paper, cut and glue.

Model for your collection.
The M40 is an American sniper rifle designed on the basis of the Remington 40ХВ (which in turn is an improved version of the Remington 700).
Print on a printer, on A4 sheets of matte thick paper, cut and glue.