In order to sew a coat that fits well, you need to buildpattern-basis coat, based on your own standards.
To measure the semi-circumference of the chest, it is necessary to give an increase for the freedom of fit. For a semi-fitting silhouettecoatit is 7.5-8.5 cm, for straightcoat and free coat- 8.5-10cm. If you want the coat to have a very close-fitting silhouette, you need to reduce this increase in accordance with the model from 5 to 7 cm.

Before you start buildingpatterns-basics coat, check out by increases in freedom of fit.

Women's coat pattern

Pattern women's coat .

To draw a coat pattern drawing, you need to take the following measurements.

1. Coat length along the back is 110 cm

2. Back length to waist 38 cm

3. Shoulder length 13 cm

4. Neck semicircle 18 cm

5. Semicircle above the chest 44 cm

6. Chest semicircle 48 cm

7. Waist semicircle 38 cm

8. Semi-circle of hips 50 cm

9. Sleeve length 58 cm

10. Wrist semicircle 9 cm

Women's coat pattern: construction

Coat pattern: first stage of construction

Draw a rectangle ABCD.

Coat width.The lines of the rectangle AB and DC are equal to 55.5 centimeters (the semicircle of the chest according to the measurement plus 7.5 centimeters for all sizes): 48 + 7.5 = 55.5.

Coat length.The lines of the rectangle AD and BC are equal to 110 centimeters (the length of the coat as measured). The length of the coat can be adjusted as desired.

Coat armhole depth. From point A, 23 centimeters are laid down and point D is placed (GPr = 1/10OG + 10.5 cm + an increase of 3 cm from the Increase Table) 96: 10 + 10.5 + 3 = 23. A straight line is drawn from point G to the right and the point of intersection of it with line BC is designated by the letter G1.

Waist line of the coat. From point A, 38 centimeters are laid down (the length of the back to the waist as measured) and a point T is placed. A straight line is drawn from point T to the right and the point of intersection of it with the line BC is designated by the letter T1.

Coat hip line. From point T, 18-20 centimeters are laid down and point L is placed. From point L, a straight line is drawn to the right and the point of intersection with the line BC is designated by the letter L1.

Coat back width. From point G, 19 centimeters are set aside to the right and point G2 is placed (1/8OG + 5.5 + an increase of 1.5 cm from the Table of Increases): 96: 8 + 5.5 + 1.5 = 19. From point G2, draw a line upward and the point of its intersection with line A B is designated by the letter P.

Armhole width.From point G2, 14 centimeters are set aside to the right and point G3 is placed (1/8OG-1.5 cm + 3.5 cm increase from the Table of Increases): 96: 8-1.5 + 3.5 = 14.

Raising the front of a coat. From point G1, 28.5 centimeters are set aside upward and point W is placed (1/2 of the chest semicircle by measurement plus 1.5-2 centimeters for all sizes + 3 cm increase in armhole depth): 48:2 + 1.5 + 3 = 28 ,5. From point G3, 28.5 centimeters are also set aside upward and point P1 is placed. The point of intersection with line A B is designated P2. Points P1 and Ш are connected.

Coat side line. The segment G2G3 is divided in half and from the division point a line is drawn down to the intersection with the DC line and a point H is placed, the intersection with the TT1 line is designated by the letter T2, and with the hip line LL1 by the letter L2.

Auxiliary lines of the shoulder and armhole of the coat. Lines PG2 and P2G3 are divided into four equal parts.

Coat pattern: calculation of darts

Calculation of the depth of darts at the waistline of the coat. Determine the difference between the width of the coat mesh and the semi-circumference of the waist according to the measurement along with an increase of 5.5 centimeters (for all sizes): 55.5-(38+5.5) = 12.

Depth of darts in the back and front of the coat. The front is 3 centimeters (1/4 of the difference):

12: 4=3.

Front side dart depthcoatequal to 2 centimeters (1/4 difference minus 1 centimeter for all sizes): 12:4-1=2.

Line dart depth side seam coatequal to 4 centimeters (1/4 difference plus 1 centimeter for all sizes): 12: 4+1=4.

Coat pattern: second stage of construction

Women's coat pattern: building the back

Neckline. From point A, add 7.5 centimeters to the right (1/3 of the semicircle of the neck by measurement plus 1.5 centimeters for all sizes): 18: 3+1.5=7.5. From point 7.5 upwards, 1.5 centimeters are laid aside, from point 1.5 upwards - 1 centimeter. Points A and 1 are connected by a concave line.

The slope of the coat shoulder. 1.5 centimeters are laid down from point P.

Shoulder line.The shoulder line is drawn from point 1.5 (neck) through point 1.5 (shoulder slope) with a length equal to 14 centimeters (shoulder length by measurement plus 1 centimeter for all sizes): 13 + 1 = 14. Point 1 is connected to the shoulder line .

Armhole line.From point G2, dividing the angle in half, set aside 2.5-3 centimeters. The armhole line is drawn through point 14, the midpoint of the division of line PG2, points 3 and G4.

Side seam of the coat. 2 centimeters are set aside from point T2 to the left. The side seam line is drawn through points G4, 2, L2 until it intersects with the DC line.

Dart at the waistline of the coat. The distance GG2 is divided in half and 1 centimeter is set aside from the division point to the left. From point 1, draw a line down to the intersection with the hip line LL1 and from the intersection point, put 2 centimeters up. From point 1, 3-4 centimeters are laid down. From the point of intersection with the waist line TT1, 1.5 centimeters are set aside to the right and left and connect them to points 5-6 and 2.

Coat pattern: third stage of construction

Construction of the front of the coat

Coat neckline. From point W, add 7.5 centimeters to the left (1/3 of the semicircle of the neck by measurement plus 1.5 centimeters for all sizes): 18: 3+1.5=7.5. From point W, 8 centimeters are laid down (1/3 of the neck semicircle by measurement plus 2 centimeters for all sizes): 18: 3+2=8.

Points 7,5 and 8 are connected by a dotted line, dividing it in half. From point Ш through the division point of the dotted line, 7.5 centimeters are laid out. Points 7.5 are connected to point 8 by a concave line.

Shoulder length from neckline to chest dart. From point 7.5 (top), 4 centimeters are laid to the left and then down - 1 centimeter. Points 1 and 7.5 (top) are connected. From point G1 to the left, 10.5 centimeters are set aside (neckline from point W to point 7.5 plus 4 centimeters - shoulder length from neckline to dart minus 1 centimeter for all sizes): 7.5+4-1=10.5 .

Points 1 and 10.5 are connected.

Coat chest dart. The right dart line is equal to the distance from point 1 to the armhole line minus the increase in the depth of the floodplain (in this case it is 3 cm). The right line of the dart from point 1 to point 3 is divided in half and 4 centimeters are set aside from the division point to the left (the semicircle of the chest according to the measurement minus the semicircle above the chest according to the measurement): 48-44 = 4.

The left dart line is drawn through points 9.5 and 4 with a length equal to the right dart line, and point P3 is placed.

Shoulder length from bust dart to armhole. Point P3 is connected by a dotted line to the upper division point of line PG2 (back). From point P3 along the dotted line, 9 centimeters are set aside to the left (the length of the shoulder according to the measurement minus 4 centimeters is the length of the shoulder from the neckline to the chest dart): 13-4 = 9.

Point 9 is connected to the lower division point of line P2G3. From point 9, 2 centimeters are laid down and connected to point P3.

Coat armhole line. The dotted line from point 2 to the lower division point of line P2G3 is divided in half and 1 centimeter is set aside from the division point to the right. From the lower right corner of the armhole, dividing the corner in half, set aside 2.5 centimeters. The armhole line is drawn through points 2.1, the lower dividing point of the line P2G3, point 2.5 and, touching the descent line of the armhole, to point G4.

Side seam of the coat. 2 centimeters are set aside from point T2 to the right. The side seam line is drawn through points G4, 2, L2 until it intersects with the DC line and point H is placed.

Designing the waistline of the coat on the pattern. From point T1, 2 centimeters are laid down and connected to point 2 (side seam).

Coat hip line. 2 centimeters are laid down from point L1 and connected to point L2.

Bottom line of the coat. From point C, line BC is extended downward by 2 centimeters and connected to point H.

Dart at the waistline of the coat (front). From point 2 (waist line) 9 centimeters are set aside to the left (distance from point 10.5 to point G1 minus 1.5 centimeters for all sizes): 10.5-1.5 = 9.

Point 9 is connected to point 10.5. From point 10.5, 5-6 centimeters are laid down.

From point 9 to the left, 3 centimeters are set aside and connected to point 5-6.

The depth of the front dart of the coat is divided in half and a dotted line is drawn from the division point down to the intersection with the hip line. 2 centimeters are laid upward from the intersection point and connected to points 9 and 3.

Dart at the waistline of the coat (side). From point G3, 2.5-3 cm is set aside to the right and a dotted line is drawn down until it intersects with the hip line. From the point of intersection of the hip line, 2 centimeters are laid upward, and from point 3, 4-5 centimeters are laid down. From the point of intersection of the dotted line with the waist line, put 1 centimeter to the right and left and connect them to points 4-5 and 2.

Increase for coat fastener (side). From point 8 (neck) and point 2 (bottom line) put 4-5 centimeters to the right and connect them.

From point 8, 1.5-2 centimeters are laid down. A smooth line is drawn through point 1.5-2 to point 5. From point C and from point 2 (descent of the waist line) 3 cm are set aside.

Points 3, 3, 5 are connected.

Note.Pattern drawing calculations are given for a single-breasted coat. To pattern a double-breasted coat, add 8-10 centimeters to the side. If the semicircle of the hips according to the measurement (together with an increase of 3 centimeters for all sizes) turns out to be greater than according to the pattern drawing, then when cutting, make the corresponding increase: 1/2, the difference between the semicircle of the hips according to the measurement (together with the increase) and the pattern drawing is added to front and 1/2, the difference is towards the back.

Coat pattern: fourth stage of construction (sleeve)

Pattern of a two-seam sleeve for a coat

Draw a rectangle ABCD.
Coat sleeve width. The lines of the rectangle AB and DC are equal to 18 centimeters (1/3 of the semicircle of the chest by measurement plus 2 centimeters for all sizes):
48: 3+2 = 18.
The length of the sleeve.The lines of the rectangle AD and BC are equal to 58 centimeters (sleeve length according to measurement).

Sleeve hem height. From point A, 17 centimeters are laid down and point P is placed (3/4 of the depth of the jacket's armhole plus 2 centimeters for all sizes): (20: 4x3) + 2 = 17.
From point P, a straight line is drawn to the right until it intersects with line BC, and the intersection point is designated by the letter P1.

Elbow line.The PD line is divided in half. From the division point, 2 centimeters are set aside upward and point L is placed. From point L, a straight line is drawn to the right until it intersects with line BC and the intersection point is designated by the letter L1.
Construction of the upper half of the sleeve

Front seam.From points P, L and D, put 4 centimeters to the left and connect. 2 centimeters are set aside from point L to the left. The front seam line is drawn through points 4, 2, 4.

Sleeve hem line. Line AB is divided in half and the division point is designated by the letter O. 5 centimeters are laid upward from point P.
Points O and 5 are connected by a dotted line, divided in half, and the division point is designated by the letter O1. Points A and O1 are connected by a dotted line and divided into three equal parts. The lower division point is designated by the letter O2. From point P, dividing the angle in half, set aside 2.5 centimeters. 5 centimeters are laid upward from point P1 and point P2 is placed.

Through point P2, a dotted line of arbitrary length is drawn to the right and left. 4 centimeters are set aside from point P2 to the right.
The distance VP2 is divided in half, the division point is designated Oz. Points O and O3 are connected by a dotted line, divided in half, and 1.5 centimeters are set aside from the division point upward at right angles to the dotted line. The sleeve hem line is drawn through points 4, 2.5, 5, O2, O, 1.5, Oz, 4.

Elbow seam line. 4 centimeters are set aside from point L1 to the right and connected to point 4 (upper). From point 4 (top) 9 centimeters are laid down. Then, from point D, 14 centimeters are set aside to the right (semicircle of the wrist by measurement plus 5 centimeters for all sizes):
9+5 = 14. Points 14 and 9 are connected by a dotted line, divided in half and 1 centimeter is set aside from the division point to the right. The elbow suture line is drawn through points 4, 9, 1, 14, lengthening it down by 3 centimeters.

Bottom line.The bottom line is drawn through points 4, D, 3.

The fold line of the front of the sleeve. 2 centimeters are set aside from point L to the right. The fold line is drawn through points D, 2, P and further until it intersects with the sleeve hem line.

When ironing, the front seam line is pulled back, and the elbow seam line is ironed.

Pattern of the lower half of the coat sleeve

Front seam.From points P, 2 and D, put 3 centimeters to the right and connect them.

Bottom line.From point 3 (ulnar seam) 2 centimeters are set aside to the left. The bottom line passes through points 3 and 2.

Elbow line.From point 3 to the right, 9.5 centimeters are set aside (1/4 of the chest semicircle by measurement minus 2.5 centimeters for all sizes):
48: 4-2,5=9,5.

Elbow seam line. From point 3 to the right, 10 centimeters are set aside (1/4 of the chest semicircle by measurement minus 2 centimeters for all sizes): 48: 4-2 = 10.

The elbow seam line is drawn through points 2, 9.5, 10 and further until it intersects with the dotted line. The intersection point is designated by the letter 04.

Top notch.The line from point 3 to point 10 is divided into three equal parts and the division point on the left is designated by the letter 05. The notch line is drawn through points 3, O5 and O4. 2 centimeters are set aside from point O4 to the left and connected to the notch line (addition in case of need to narrow the sleeve).

Coat pattern: fifth stage of construction (collar)

Collar pattern for a women's coat

When building patterns collar coattake a shelf with a drawn lapel. The lapel of the coat is drawn by the designer based on the selected model. Then you need to mark the position of the top loop.

Point A is placed down at a distance of 1.5 cm from the loop.
On the continuation of the shoulder line, a segment GG1 is laid equal to 2.5-3 cm (the height of the collar stand).

Line AG1 is the inflection line of the lapel. A tangent to the curve of the neck is drawn parallel to this line. The point of its intersection with the shoulder line is P, the point of contact with the inflection line of the lapel is G2.

On the continuation of the line of tangency from point P, a segment of PN is laid off, equal to the length of the neck of the back (along the base) plus 0.5-1 cm.
ШШ1 - 2.5-3 cm (in this case, the angle ШШ1П is 90 degrees).

Set aside the collar width SHW = 6-11 cm (according to the model).
The end and departure line of the collar, as well as the ledge of the lapel, are designed according to the model.

One-piece and cut-off collars are constructed in a similar way. shawl type. The difference is that the collar departure line is formed by a line (the configuration of which is determined by the model) smoothly turning into the lapel line.

No matter how much we lament the transience summer days, autumn has already fully come into its own. Perhaps it is much better to stop being sad and switch to the new opportunities that the golden season gives us. So, the most pleasant of them will be the opportunity to update your wardrobe.

It's time to look for cozy and beautiful outerwear. I propose to bet on a coat - a thing that will always be in fashion. The coat pattern presented in this article is good for its simplicity and versatility. Don’t let the bright colors scare you, because you can sew it from any shade of fabric. But the style of the coat is slightly flared and loose, perfect for any figure.

How to sew a coat with your own hands

At the end of the sewing description, you can download coat patterns of 3 sizes - 44, 46 and 48. Fabric consumption is indicated for these sizes, respectively. The length of the product along the back is 102 - 104 - 106 cm.

What you will need:

• 2.50-2.60-2.65 m light quilted material, width - 150 cm
• 1.20 m - 1.30 m adhesive spacer. material width 90 cm
• 4 mother-of-pearl buttons, diameter 33 mm
• 1 pair of padded hangers

ATTENTION! If you do not have enough professional skills, the product can be simplified by replacing the stitched loops with overlocked loops. More simpler option- sew buttons along the edge of the fastener, and on the right edge of the side from the faces. sides - buttons.

The following fabrics are also suitable for sewing coats: brocade, double-faced material, heavy jacquard.

Layout plan for coat pattern pieces

On the folded fabric, lay out the pattern pieces (2 times parts 14 and 4 times part D), following the diagram. On the lining material folded in the same way, lay out the patterns of parts 15, A, B and C, in the same way as on the main fabric. Cut out the details of the coat with a 1 cm allowance. Add 4.5 cm to the hem of the bottom of the coat and sleeves.

How to sew a coat: job description

Duplicate the necessary parts with cushioning material.

On the right side, follow the markings and make stitching stitches.

Stitch the sections of the back reliefs. Then press the seams.

Finish the front ridges and seam pockets by sewing one piece of the pocket lining to the front. And the second part of the lining goes to the side of the front. Press the seams onto the lining. Stitch the relief sections, excluding the entrance to the pocket. Place a finishing stitch along the opening of the pocket. Stitch the edges of the pocket lining.

Sew the shoulder and side sections of the coat, then the shoulder sections of the hems and the inner back yoke. Press seam allowances.

Sew the middle edges of the lower collar pieces. Press seam allowances. Fold the collars of the faces. sides facing in and hem the edges of the flap and ends, seating the top collar at the ends. Trim seam allowances to 5mm. Turn the part right side out. side, straighten the hemmed edges. Baste the neck edges of the top and bottom collars. Place a finishing stitch along the edges of the collar at a distance of 1 cm.

Place the collar into the neck according to the markings on the faces. sides.

Stitch to the wrong side. side internal cuts (1 cm) of the hems and inner yoke. On faces On the side of the product, place the edging/yoke of the faces. side down and sew the edges, bottom corners of the edges and neck edges, sewing in the collar. Trim the turning seam to 5 mm, notch the allowances in the figured areas. Fold the hem/yoke to the wrong side. side, collar outward and straighten the hemmed edges.

Iron inside out. side and hem the hem of the bottom of the product.

Place a finishing stitch along the edges of the sides at a distance of 1 cm.

Finish sewing stitches on the hem side. Baste the sections of the product's armholes and hems/yokes.

Use a pressed seam to sew the longitudinal seams of the sleeves. Finish the bottom of the sleeves as you did for the bottom of the garment. Sew the sleeves into the armholes.

Sew on the wrong side. the sides of the hangers to the seams of the armholes and to the inner yoke at the neck.

Sew buttons on the left edge of the side.

Women's size chart

Coat patterns from Marlene Mukai

Very interesting models coats are presented in drawings from Marlene Mukai. Below the photo of each coat you can download the pattern drawings. To work, you will need to enlarge the pattern pieces to the specified sizes.

The first model is a coat in style oversize, with a fairly simple cut. This style is perfect for both thin girls, emphasizing the fragility of the figure, and plump ladies, hiding some flaws.

The second model is a short coat to mid-thigh. An excellent solution for girls leading an active lifestyle. This style does not restrict movement and allows you to feel comfortable while driving a car, while shopping and when performing other everyday activities.

You are getting four sizes patterns.

The file with the patterns is sent instantly by email (to your e-mail address) and printed on a regular printer.

Ready-made pattern for a women's demi-season coat in four sizes Og 88 – 100 cm.

We offer ready-made pattern demi-season coat with reliefs, topstitched with a turn-down collar on a small stand. Pockets are located in the seams of the reliefs. If we talk about the complexity of processing, this is probably one of the simplest types of pockets. Loop and button closure. Sleeves are set-in at the cuffs.

Using this pattern you can sew not only a demi-season coat, but also a raincoat or jacket. In the latter case, you just need to adjust the length.

We offer a ready-made pattern for a demi-season coat with a fashionable O-shaped silhouette, the so-called cocoon coat. The coat is not overloaded with elements, since the main emphasis of such models is volume. The absence of a collar will allow you to complement the coat with a light scarf or a voluminous snood.

This cocoon coat model is suitable for beginner tailors, as it does not contain elements that are difficult to process. Pockets are located in the seams of the reliefs. This is the easiest pocket to process.

The cocoon coat pattern is given in three sizes for girls with a chest circumference of 100-104-108 cm. The pattern for the same coat in smaller sizes (bust circumference 88-92-96 cm) is located.

To sew a coat you will need 2-2.5 m of fabric (depending on the size and length of the product) with a width of 1.50 m. Choose fashionable fabrics. As always, the choice is yours!

The pattern is given in three sizes in life size no seam allowances.

A voluminous and loose cocoon coat confidently entered the wardrobe of a modern woman several seasons ago. Today, this coat style is winning the hearts of more and more fashionistas.

We offer a ready-made cocoon coat pattern in three sizes in full size O 88-92-96 cm.

The pattern is sent instantly by email (to your e-mail address). There is no need to download anything. The file with the pattern is included in the email attachment. Open, print, glue the sheets together, cut out the size you need and you can start cutting.

A coat with reliefs, in the seams of which there are pockets, is one of the easiest types of pockets to process, so novice tailors can safely take on sewing this coat model.

Class="img_anons" title="Straight-fit coat pattern in three sizes

">Модное пальто без воротника, которое можно дополнить !} bright accessories- scarf or belt. This coat model is very versatile. Such a coat can be part of an ensemble made from the same fabric: a sheath dress plus a coat, a pencil skirt plus a coat, tight pants plus a coat or serve as a completely independent element in your wardrobe. You determine the status of this model. It all depends on the chosen material, on the finish, on the length of the product, on the type of fastener, etc. The coat can be without a fastener or with a zipper, or with hooks and loops, or with a fastener with hinged loops and buttons. You can adjust the length of the sleeve and the product itself at your own discretion. The pattern is just a suggestion. The result is up to you.

The coat is a classic element of the demi-season wardrobe, which last years is winning more and more young fans. Modern tendencies They give us huge scope for combinations and fantasies - you can combine the item with classic boots, chunky boots, and even sneakers. Current models (for example, oversized or balloon) are suitable for girls of any body type. By choosing different accessories and shoes, you can create new looks almost every day.

Changeable weather, harsh, cold or damp climate are not the only reasons for the popularity of women's coats. This is a stylish wardrobe item that completes the look and makes it relevant. By choosing the right style, you can visually adjust your figure parameters.

The most popular models on the seasonal catwalks are coat-dress, “tulip”, trapezoidal cut, with one-piece sleeves or a belt (swing, without buttons). They are decorated with turn-down collars, stand-up collars, classic lapels or bold fur trim on the cuffs. The color scheme of many recent seasons has been classic, dramatic shades of red and burgundy. A win-win option that is timeless - a coat of graphite gray, milky, terracotta colors or in a small pattern (“houndstooth”, “Vichy” check).

whatkatewore.com

Beginning of work

Taking measurements and creating the base

To correctly design a coat pattern, you must first build its base according to the parameters of the figure. To do this, carefully take measurements, not forgetting about allowances for a loose fit. The increase is up to 8.5 cm on straight styles and up to 10 cm on loose ones. For a tight fit, an increase of 5-7 cm will be enough.

Before building the base, you need to take measurements to determine the parameters.

• The length of the product is along the back, shoulder and to the waist.
• Half-circumferences - neck, chest, chest, waist, hips, wrists.
• Sleeve size.

For clarity and convenience, a basic rectangle is constructed on paper, the corners of which are indicated by points ABCD.

• AB/CD (product width) is determined by the half-bust circumference (Og) plus 75 mm.
• AD/BC (product length) - according to model.

Also, to create a coat pattern, you need to calculate the depth of the armhole. It is equal to one tenth of Og plus 10.5 cm and an increase (about 3 cm). This point on the grid is designated as G. If you draw a segment from it to the right until it intersects with BC, you get G1.

To determine the lines along the waist and hips from point A down, measure the length of the back to the waist - point T will appear. From it you need to draw an axis down to BC, and mark the intersection as T1. Now, from marks T and T1 downwards, measure about one-fifth of the entire length (18-25 cm) and place points L and L1, respectively, for the hips.

ucarecdn.com

The back width of the product is defined as one-eighth of Og plus 5.5 cm and the increase is the segment G-G2. From G2 you need to extend the axis upward to the intersection with AB, marking it as P. If from the same G2 you measure one-eighth of Og to the right (plus the increase and minus one and a half centimeters), you get G3. Section G2-G3 - width along the armhole.

The section G1-SH is laid upward, focusing on half the half-circumference of the chest (plus one and a half centimeters and an increase in the depth of the armhole). The same distance is set aside from G3 - point P1 is obtained. Extending the line to AB, the intersection is designated as P2. Section P2-Ш is a rise along the shelf.

The last thing to do to create the mesh is to draw the side, shoulder and armhole lines. On the segment G2-G3, the center is marked, from it the axis is drawn down to CD, marking the intersection as H, then to T-T1 (T2) and to L-L1 (L2). To align the auxiliary axes on the shoulder and armhole, the segments P-G2 and P2-G3 are divided into four equal parts. To complete the coat pattern, you need to calculate the darts at the waist, back and front.

Creating a pattern for the basic model

The first stage of building a basic coat model is drawing out the back.

• A cutout is made on the neckline - a concave line is drawn from point A to A1, starting from 1/3 of the half-circumference of the neck (plus 1.5 centimeters) and bending the curve upward by 1.5 and 1 cm.
• 1.5 cm are set aside from point P for an inclination along the shoulder.
• The line of the shoulder and armhole is drawn through P-G2 (the bisector of the angle is drawn from G2).
• A seam is formed on the side - from T2 through G4, L2 to CD.
• Waist darts are made from half of G-G2, a guideline on the waist and hip lines T-T1 and L-L1.

womanadvice.ru

The front of the product is lined up, starting from the neckline. From mark Ш you need to set aside a third of Og to the left (plus 1.5 centimeters - a fixed value for all sizes). You need to put a third of the Og down, adding 2 cm to the segment. The resulting ends of the segments are connected by a dotted axis and its center is measured. It is connected to Sh.

Next, you need to shape the shoulder, measuring its length from the neckline to the dart on the chest. You will also need the distance from it to the armhole. Connect point P3 (the end of the left dart line) and the top P-G2 with a dotted line. Measure along the dotted line for the shoulder length, subtracting the distance from the neckline to the chest dart. Connect the resulting point to the lower end of P2-G3, set aside another 2 cm and extend the segment to P3.

Now you need to draw an armhole line, a seam on the side (from T2 through G4-L2 to CD ending at mark H). On the pattern, draw a line along the waist, hips and bottom, make waist darts along the front and sides. On a classic coat, you can make a fastener - for this, an increase in the side is provided (on double-breasted models it is up to 10 cm).

Having mastered the sequence of actions, it will be possible to design products of different styles and cuts.

Classic model with two-seam sleeves

Coat pattern classic style fits well on cloth - for example, gray. It will need a lining, buttons and threads to match. For a standard product of sizes 44-48, length from waist 65 cm, choose about three meters of fabric. From similar material you can sew another classic model - double-breasted, with an “English” collar and set-in pockets. The lining in it can be stitched or detached.

miltex.su

The front half of the product consists of three parts: central, side and side.

It is necessary to model two seams on the sides (raised) - from the chest and waist darts and from the center of the armhole.

The seams are lined up according to the pattern, rounding the lines on the chest and cutting the details along the edges of the darts. The back of the coat is constructed in the same way. The two-seam sleeve, collar and lapel are formed separately. You can also make a flap for the pockets or embed them with a stitching sheet.

On the classic model, either a detachable collar or a stitched stand is made. For them, you first need to measure the neckline in front and back. It is done along the control points AB of the base rectangle. The sleeve length will be about 4 cm, and the width is determined by the parameters of the upper half.

The pattern of a women's coat with a modern straight silhouette is similar to the classic one, but the sleeves in it, as a rule, are single-seam and have one-piece cuffs.

The shelf is cut along the waist line. Folds are made in the seams on the shoulders and waist - one on top of the other. It is advisable to expand the shoulder girdle.

Basic drawings can also be used to design winter clothing, but additional additions will need to be added - for a layer of insulation.

Fashionable coats

A-line and close-fitting

To obtain a trapezoidal silhouette, you will need to add about 10 cm to the half-circumference of the hips. You can balance the shape of the product with sleeves extended at the bottom by 20-25 cm. The top of the product is tightly “fitted” to the figure, and the expansion begins only from the hip line. The style is complemented by a set-in jacket collar, double-breasted fastening and decorative stitching.

dd-shop.ru

Models with a tight fit are often complemented with a stand-up collar. It is necessary to enlarge the neckline and make shirt sleeves that are slightly wider at the bottom. The shoulder is narrowed so that the armhole along the back is vertical. The chest and waist darts are moved to the chest, on the side. The set-in belt can be decorated with stitching.

The adjacent model is modified by widening at the bottom and making a single-breasted wrap and a belt that is tied at the waist.

Progress

• Increase the width of the back by 6 cm.
• Widen the neck a couple of centimeters.
• Change the location of the shoulder points along the back a centimeter up, and along the shelf - a centimeter down.

Another style that allows you to emphasize your figure is semi-fitted. For convenience, such a coat can be sewn with a zipper. It is also better to make the collar stand-up, fastened with buttons. Since the coat is narrow, it is worth making a vent on the back panel along the middle seam.

Pattern of a model with a voluminous collar

A coat with large collars should be sewn by modeling the drawing according to basic scheme jacket This way the lines will be balanced and harmonious. The work begins with a drawing of a shelf on which there is no need to make darts. The side seam is adjusted to remove the flare, and the shoulder seam is shortened by the amount of opening along the bust dart. On the back you need to make a slot for a third of the length of the product - about 8 cm wide.

ekaterinasmolina.ru

If you want to remove the chest dart on a magazine pattern, you need to cut the front, close it, leaving 1-1.5 centimeters for the solution. The waist dart will need to be opened by moving the side part away. It is removed along the back.

The sleeve is modeled based on the diagram of a classic single-seam element. Its width is determined by adding 10-12 cm to the circumference of the upper arm for a loose fit. To measure the parameters of the bottom, you need to measure your wrist, adding 15-16 cm to its circumference.

Main decorative element- voluminous collar - modeled from the collar. At the shoulder line you need to put 2 cm to the right, and at the waist - 7-8 cm up and to the right. From the resulting point, draw a vertical line to the bottom of the front and up to the shoulder - this is the bend of the lapel. Its configuration is drawn by drawing a horizontal line along the lower point of the neck. The selection is cut out separately.

Patterns for cashmere products

Cashmere is one of the most suitable materials for coats. It is warm, soft and looks elegant and respectable. To ensure that all the features of the fabric are used, choose equally “status” styles - straight with a double-breasted wrap or with a dropped shoulder. Secure the product with a belt, and the classic turn-down collar should be secured with a button. Extend the neck according to the selected model. Make the sleeves one-piece and with three seams.

elema.by

A straight cashmere coat in a traditional style has several features:

• the hem is closed, so there are no seams on the sides;
• the chest dart is reduced by a centimeter and moved to the neckline;
• The width of the back is increased by 5-6 cm.

To model straight products with a dropped shoulder, the neckline is widened, and on single-seam sleeves, expansion and stitched cuffs are made. The shoulder point must be raised by a centimeter and the width of the chest and back increased by the same amount. The chest dart is moved from the shoulder to the neckline, and the shoulder dart is reduced by a centimeter. Taking into account all the changes, you can build a base according to individual sizes.

The current trend is a coat that has no buttons or zippers, just a belt. Its basis is a straight, semi-adjacent style of the product with bust dart. To secure the shelf, you can provide a large hidden button. If the fabric is double-faced and has a fleecy back, no lining is needed.

When sewing things with one-piece sleeves, you must iron them. Preparation will help you avoid mistakes when basting and get a well-fitting product. To understand where to iron and where to press sleeves, imagine what your arm looks like when you bend it at the elbow.

framen.ru

The laconic basic model can be “diversified” with slanted pockets, interesting sleeves, along the bottom processed with facing or one-piece cuffs. The “robe” model is slightly narrowed at the hem, adjusting the width of the sleeves according to the product.

What could be more pleasant in the cool season than putting on a bright, eye-catching coat and walking through the streets of the city, stopping by your favorite cafe, enjoying the spicy invigorating smells of coffee and warm croissants, and leaving behind a thin trail of an elegant look...

Your wardrobe should have a lot different coats for any occasion. And to demonstrate your refined taste in clothing, all you have to do is sew several luxurious coats using our patterns. And then, firstly, you will always have “what to wear”, and secondly, you will be able to change your looks not only according to the occasion, but also according to your mood.

A coat can create a mood, and when choosing a coat for each occasion, be it a business meeting or a walk in the park, remember that you will inevitably have to play by its rules.

A red coat will charge you with incredible energy; in it you will find yourself in the center of the Universe and you will not be able to avoid the attention of others. A feeling of euphoria from admiring glances is included.

Business meeting or dinner with colleagues? Then your choice is a spectacular blue coat made of luxurious cashmere. This color will create the right mood and help set the right tone for the entire evening.

Successful transactions, new projects and attractive business prospects are guaranteed.

Ideal for everyday tasks, of which modern women have plenty a coat will do gray or terracotta colors. Soft, light, not restricting movement, perhaps you will opt for an oversized style. However, no matter what you choose, you will always feel comfortable in such a coat.

For the first date, sew a light milky coat. It is the milky shade of the fabric that adds luxury and a touch of glamorous chic to the models, which will be just appropriate. The style of such a coat can be different and depends only on your taste and style preferences. These can be either short or maxi models, fitted, double-breasted, single-breasted, with classic or raglan sleeves - the choice is always yours. Create patterns, sew beautiful coats and wear them with pleasure!

What could be better and more comfortable for the cool season than a cozy demi-season coat made of Loden! This unique material is made from natural sheep wool, and to make the fabric softer, mohair is added to the raw material. The result is a very soft and delicate material, pleasant to the touch. It is remarkably moldable, flexible and obedient in texture. Products made from loden are very cozy and warm. In this lesson we will model a pattern for a demi-season coat, which we sewed from loden, and also reveal secrets that will help you create a stylish, high-quality product.

Jean jacket with fur is rapidly winning the hearts of fashionistas. And it’s not surprising, because this is not only a stylish thing that will help you out in any situation, but also a practical, warm and very combinatorial model - it can be combined with trousers, skirts, dresses... In this lesson we invite you to model a jacket pattern, and then experiment with the style yourself.

Clothes in the same style for mother and daughter are incredibly popular today. When you meet such a couple, you can’t take your eyes off them! And how could it be otherwise, because it is the mother who is an example for her child, she is the one who is able to instill good taste and a sense of style in clothing from childhood. And doing this by your own example is much more pleasant and fun! Today we want to offer you patterns of two stylish cropped coats for mother and daughter, which you can sew using our patterns.

No matter how they change fashion trends, an oversized loose-fitting coat with an unusually large collar and voluminous sleeves almost always remains at the peak of popularity. Made from a soft pastel-colored blend fabric, the coat is very feminine and versatile. Rest assured, this model from the Chloe fashion house will take its rightful place in your wardrobe. Another big advantage of such a product is that you don’t have to adjust the pattern to fit your figure, because the motto of all oversized models is the bigger the better! Pattern oversized coat- in our lesson.

In our next lesson we offer you the modeling of a coat pattern with a one-piece upper part of the sleeve. You will definitely like this voluminous double-breasted cocoon style model, because it has one feature - the sleeve design allows you to create a very smooth, streamlined shoulder line. The quality of the fabric and clean lines give the product a touch of purism style, which is characterized by the absence of complex shapes and is aimed primarily at emphasizing your individuality. The use of natural high-quality fabrics is one of the important components of this style, so when choosing fabric for a model, it is better not to allow compromises.

It's no secret that the role of the main violin in demi-season looks is assigned to outerwear. And whatever options you create by collecting stylish solution, the emphasis should always be on the coat. Among the huge number of models, it remains to find the one that suits you, and will be not only beautiful and impressive, but also comfortable and warm, which is especially important in the cold autumn. To guess for sure, we recommend that you pay attention to the cocoon coat. It received its name for its similar shape, and its silhouette, despite its apparent volume, smoothly envelops the figure, remaining at the same time very graceful. The cocoon coat pattern is in our lesson.

Each runway show of the collections of famous designers Dominico Dolce and Stefano Gabbana is a true beauty, embodied in graceful silhouettes, clean lines and luxurious prints. The couturier's refined performance is permeated with great love for women. Looking at these amazing creations, you can’t help but feel that these great masters knew the truth and got to the bottom of it, finding the answer to the most pressing question of all times and peoples - what do women really want. We invite you to fantasize about this topic and sew luxury coat from Dolce&Gabbana according to our pattern.