The right makeup for a triangular face shape. Makeup for a triangular face shape, tips from makeup artists

Body care

Face shapes

IN real life It is extremely rare to find faces that correspond to the strict proportions of the “golden section”. Often in one person there are elements of two or even several basic forms. In this case, the face is attributed to the form whose characteristic features predominate. The variety of forms can be roughly reduced to seven main types:

1. An oval face is considered ideal.
2. Round face - the horizontal and vertical dimensions of the face come closer to each other. The areas of the temples, lower jaw and chin have rounded, soft outlines.
3. Square face- has developed angles of the lower jaw, rectangular outlines of the upper and lower parts of the face.

The standard of the correct face shape is considered to be one that is distinguished by smooth contours of the forehead, cheekbones, lower jaw and chin and seems to fit into an oval. Thus, an oval face with correct proportional details is considered conventionally ideal.

4. Triangular face - wide in the forehead and cheekbones and narrowed towards the chin.
5. Trapezoidal face - characterized by pronounced angles of the lower jaw. The upper part of the face is much narrower than the lower.
6. Rectangular face - characterized by a sharp predominance vertical dimensions above the horizontal ones. This type of face is characterized by a high forehead and an elongated chin.
7. Diamond-shaped face - has wide cheekbones, narrowed in the upper and lower parts of the face.

Correction of face shape.

When applying makeup, you should know that according to anatomical characteristics, the face is usually divided into three equal parts: upper, middle and lower. By type the face can have different shapes: round, square, triangular, trapezoidal, elongated, diamond-shaped. Each form has its own distinctive individual characteristics. Let's take a closer look at each of them.

Round face. The purpose of the correction is to lengthen the face and visually reduce the volume of the cheeks:

- darken the side surfaces of the face (from the temples down to the lower jaw) using foundation or powder slightly darker than the natural complexion;
- apply blush on the cheekbones in the shape of a triangle, extended to the corners of the mouth, the color is neutral, dark.

A round face has smooth lines, no sharp corners or protruding lines. To change its shape, you need to darken it darker foundation or powder, using a large brush, on the cheeks. This will give an illusionary elongated shape to a round face. It is necessary to somehow reduce the volume of the cheeks. This can be done by applying blush in the form of a triangle on the cheekbones. The hairstyle can also visually lengthen the face; to do this, beat the cob with the forehead or place a small roller (voluminous top), and comb the side strands onto the cheeks, covering part of the face.

Square face. The purpose of the correction is to soften the sharp outlines of the lower jaw and forehead: - darken the protruding corners of the lower jaw and “round” the hairline; - apply blush on the cheekbones in the shape of a triangle, elongated towards the temples, the color is neutral, maybe bright, lively. A square face is characterized by the balance of the upper and lower parts, the unfolded angles of the lower jaw and is shaped like a square. To soften the shape of the face, use dark powder or dark foundation. They are also used for tinting (darkening) the unfolded corners of the lower jaw. Using light and shadow, they try to remove the heaviness of the face and visually lengthen its shape. Choose dark blush and apply it to the cheekbones, giving it the shape of a triangle, the ends of which are extended towards the temples.

Triangular face. The purpose of the correction is to visually balance the wide upper part of the face with the narrow lower part: - darken the temples and the side surface of the cheekbones; - if a sharp chin stands out, powder it with darker powder; - highlight the subzygomatic depressions and lateral surfaces of the lower jaw, apply blush to the front surface of the cheeks in the shape of a diamond, the color is light and delicate. A triangular face is shaped like a triangle: it tapers towards the chin, as if sharpening, while the upper part (frontal) is much wider than the lower part (chin). You can illusorily balance the upper (wide) part of the face in relation to the lower (narrow) part by using dark powder or foundation, which is applied to the surface of the temples and cheekbones. The lower surface of the sharp chin is also powdered or tinted dark color, as if reducing it. The main task in correcting this face shape is to expand it. Blush will help with this; they are applied to the front surface of the cheeks in the shape of a diamond.

Trapezoidal face. The purpose of the correction is to reduce the volume of the wide lower part of the face, try to expand the upper part: - darken the lateral surface of the lower jaw; - highlight the temporal zone; - apply blush in the shape of a rectangle, elongated and shaded towards the temples. A trapezoidal face is shaped like a trapezoid. The upper part of such a face is significantly narrowed, and the lower part is widened, the angles of the lower jaw are more sharply defined. To visually reduce the volume of the wide (lower) part of the face, the lateral parts of the lower jaw are powdered or tinted with a dark color (in relation to the entire face). Blush in this case should play the role of scales and balance the heavy lower part with the lighter, tapered upper part. The blush is distributed on the cheekbones in the form of a rectangle, shaded towards the temples, slightly capturing their surface. Blush shifts the focus to the eyebrows and eyes, which are beautifully tinted.

Rectangular face. The purpose of the correction is to visually expand and shorten the oval of the face: - darken the forehead along the hairline; - darken the lower jaw; - highlight the side surface of the face; - apply blush in the shape of an oval and blend horizontally, the color is light and delicate. Diamond-shaped face. The purpose of the correction is to visually soften the angular contours of the face: - darken the convex parts of the cheekbones; - highlight the subzygomatic depressions and temporal areas; - apply blush in the shape of a triangle on the front of the cheekbones, color - neutral, dark. For a diamond-shaped face, correction involves softening the lines and angles, reminiscent of a diamond shape. To do this, darken the most protruding parts with a dark foundation or powder. When applying blush, you need to follow a certain pattern, in this case it should look like a triangle. Blush is applied to the front of the face and faded away, while trying to concentrate it on the front surface, without covering the cheekbones and sides. Blush should distract attention from the angular contours of the face.

An elongated face has an elongated shape, and it must be visually “shortened”, while trying to expand it at the same time. To do this, darken the lower area of the chin with dark powder. The upper part of the forehead can also be toned with dark powder or covered with hairstyles, for example, pony bangs or a pageboy hairstyle. Blush will help expand the face if applied and blended horizontally in the middle of the cheek.

“You are greeted by your clothes, but seen off by your mind,” people say. Perhaps this is so, in this review we will not doubt the validity of the wise proverb 🙂 Let’s talk about “ business card"Every person - his face. Alas, we are not always happy with our own appearance, which was awarded by our parents and Mother Nature. Either the nose seems too big, then the forehead is too high, then the chin is large (or maybe, on the contrary, low or small), we won’t even talk about pimples and acne... But I want, I really want to be beautiful, like the model on the cover of my favorite magazine! 🙂 So, face shape correction! How can you reduce the size of your nose, forehead, change the shape of your lips, and generally look beautiful with the help of makeup?

First, you need, of course, to understand what exactly you would like to adjust. In this article we will analyze the most common schemes for facial correction (or sculpting) using cosmetics.

In general, everything in sculpting is very simple. It couldn't be simpler the main thing to remember is one rule: highlight what you want to highlight and darken what you want to hide. We highlight parts of the face with. What are we highlighting? Usually the middle of the face, that is, the forehead, the area around the eyes, under the eyebrows, above the eyebrows, the bridge of the nose, above the lip, the middle of the chin. If the part of the face is wide, then apply it vertically; if it is too narrow, then apply it horizontally. And we darken what we want to hide with the help of dark powder or a dark contour. We apply the product along the contour of the face, on the cheekbones, on the jaw, neck and nose, if we want to make it thinner. If the nose is too wide, you should apply the corrector to the wings of the nose and blend it thoroughly.

There is, of course, more detailed diagram corrections. In this article we will consider in detail the types of face shape correction.

What haircuts should be

Nature has given every woman her own special charm and uniqueness. appearance. But for all women there are general rules on applying makeup, styling and cutting hair, depending on what type of face they have. There are five types of faces: square, oval, round, diamond and triangular.

For women with a triangular face type, the characteristic features are: a narrow chin, wide cheekbones and a broad forehead. These are the main signs that make your face look like a heart.

If you recognize yourself in this description, then we recommend that you familiarize yourself with some rules.

Hairstyles for a triangular face type should be such that they widen towards the chin. The ideal haircut would be one that resembles a trapezoid; generally speaking, anything that balances out the oval will be suitable for you, i.e. narrowed at the top and widened at the bottom.

If you want to hide imperfections even more, you can curl your hair a little, while bending the ends outward.

Hairstyles for a triangular-shaped face are optimal such that the widest part is located along the line of the earlobes or the middle of the ear. There is no need to visually emphasize already wide cheekbones. Do not cut your bangs short or comb the side strands smoothly back. But a small bang, on the contrary, will narrow a wide forehead. The best option is to make the bangs somewhat oblique or straight, but long.

Feathers will also help distract attention from a narrow chin. If your hair stylist is experienced, he will know that this look is best achieved by cutting the hair in steps from top to bottom. “Feathers” can also be styled as follows: just apply a little wax or gel to the ends of your hair and twist the hairs into feathers. The extra volume will complete your look.

If the triangular face is not too pronounced, then you can go for a short haircut with the strands pulled back from the forehead.

In addition to the classic “bob”, the “bob-bob” will also look good. This type of hairstyle will add volume to the back of the head, or perhaps a graduated haircut with slightly profiled edges will be quite suitable. With these types of haircuts, as a rule, the choice of bangs is large: straight thick, oblique, torn and other types of bangs are also suitable.

The most important thing is not to overdo it, the emphasis should not move to the forehead area. If your haircut is shoulder-length, curl the strands, this way you will create volume from the level of the chin, which will visually create the impression of an even oval face.

Recommended haircuts for triangular-shaped faces: oblique long bangs that cover most of the forehead and reach the eyebrow line. The thickest part of the bangs should be located slightly above the bridge of the nose. In this case, the curls should cover only the upper part of the ears, without completely covering the oval of the face. Light backcombing should be done when you put your hair up. Hairstyle with thick long bangs also welcome. Curls on the top of the head in combination with straight bangs will create an acceptable contrast in the haircut lines and will look very impressive.

The whole hairstyle will thus be built on contrasts, which will look very fresh, interesting and unusual, and in combination with a triangular face shape it will also look very beautiful.

Haircuts that are not recommended for this type of face. Short bangs are absolutely not suitable. You should also not comb the side hair too hard, a smooth hairstyle in this case will only spoil correct image. Cheekbones, which are already wide by definition, will stand out even more sharply, which will not give you pleasure when you look in the mirror after finishing your look.

Girls, especially those who have male type persons should not wear short hair at all.

It's best to profile the ends of your hair to break up the look. Thick ends will be removed thanks to this move, and the rest will create the appearance of volume.

If your face is completely open, it will only highlight what you would like to hide.

The “up ponytail”, so beloved by many girls, is not a desirable hairstyle for this type of face. It is suitable only for those who have a regular oval shaped face.

What shape should eyebrows be?

Be sure to pay attention to your eyebrows. For a triangular face, the shape of the eyebrows is very important, since it can also improve the oval of the face, or make it worse. Straight eyebrows are not suitable for this type; it will be best if you lift them slightly upward. The appropriate line for the eyebrows is one in which they curve slightly.

How to apply makeup

Makeup for a triangle shaped face should also balance the top and bottom of the face. Some tricks will help you create this makeup. Using a foundation that is darker in tone, darken the sides of your cheekbones and temples. If your chin stands out a lot, dust it with powder, also preferably darker in tone. The lateral surfaces of the lower jaw and subzygomatic depressions, on the contrary, need to be highlighted. In the shape of a diamond, apply blush to the front surface of the cheeks, choose one so that the texture is delicate and the color is light.

The general rules for applying makeup are:

blush should be applied to the cheekbones, towards the center of the ears;
place more emphasis on the eyes, using bright shadows and mascara;
raised eyebrows look better, so you shouldn’t paint them too much;
Apply a light tone of powder on the sides of the chin, this will visually expand it;
There is no need to paint your lips brightly, leave them light.

Remember also that there should be no sharp transitions from one tone to another or from one line to another. All lines should be shaded and applied softly. Don't use colors that are too bright or eye-catching. Peach, pastel, delicate pink - just what you need for those who want to create a delicate airy look, in which the image will be harmonious and feminine.

How to choose glasses

Choosing the right glasses frame will also help you become proportional to your face shape. For a triangular face shape, it is best to choose glasses with thin frames. If your face has a pronounced v-shape, then it is best for the frame to have sharp lines and sharp angles.

For girls whose oval is less pronounced, rectangular or square glasses are not suitable; on the contrary, make the lines of the top of the face more rounded and choose glasses of the appropriate shape.

The frame should be a light neutral shade. There is no need to choose too thin frames, which will even look a little skimpy. This is exactly the case they are talking about "golden mean".

An oval or round shape is what will suit you, but there should not be any pretentious elements or unnecessary details. Simplicity and modesty are exactly what is more appropriate for this type of face.

How to choose hats

You should also carefully select hats for a triangular face. Here the principle is the same - you should not wear a wide-brimmed hat or choose those dresses that suggest an open forehead. It is best to choose hats that would favorably emphasize the oval, somewhat narrowing the upper part of the face.

As you can see, creating an image is based on several factors, including face type, hair length, and haircut shape. If you play with the nuances of your appearance correctly, you can get a truly unforgettable image.

The triangular shape of the face should be visually narrowed in the upper part (forehead) and widened, rounded by a narrow sharp chin.

Makeup for a triangular face shape

Powder. You can visually balance the upper and lower parts of the face using dark-colored powder, which should be applied to the temples and cheekbones. The darker the color, the smaller the parts of the face it is applied to will appear. To smooth out a sharp chin, apply dark powder from the bottom to the middle of the chin.

Blush. Apply them under your cheekbones in a diamond shape. The main line should deviate slightly downwards in relation to the eyes (about 25 degrees). Do not apply blush at a strong angle - this will lengthen your face even more.

Brows. Make the beginning and end of your eyebrows smaller, leaving the middle wide.

Shadows. Apply and blend the shadows onto the upper eyelid in a semicircle. It is not recommended to apply shadow to the brow line, as this will make the eyes appear larger and draw attention to the wide upper part of the face. When making an eye contour, try not to draw out the arrow too much - this will also enlarge the eyes and draw attention to them.

Lips. You need to visually lengthen the lip line. By using contour pencil darken the corners of your lips, making them brighter than the middle.

Hairstyle for triangular face shape

Choose hairstyles that widen towards the lower part of the face, hairstyles with long straight or oblique bangs. A high side parting or a hairstyle without a parting will do. Style your hair with the ends curled outward. Haircuts with “feathers” and those that will widen at the cheekbone line and narrow at the top are suitable. Increasing the volume of hair at the back of the head can balance out both a narrow chin and wide cheekbones.

Avoid short bangs, short "men's" haircuts, hair combed smoothly on the sides, hairstyles with clear lines, hairstyles that reveal the face (ponytail, etc.). Short, voluminous haircuts are also not recommended, as they will only weigh down the upper part of the head and make it too bulky.

Accessories for a triangular face shape

Glasses. Thin rectangular frames.

Earrings. Don't wear triangle-shaped earrings. Stud earrings, small rings and ovals are suitable.

It's rare to find a woman completely satisfied with her appearance. And since the face attracts more glances, the desire to improve this part of the head arises more often. But before you resort to plastic surgery, you need to try correction with makeup.

Types of facial ovals

The shape or oval of the face is considered to be the ratio of the width of the forehead area to the chin area and the proportion between the length and width of the face. There are six main types of face shapes:

oval;
rectangular;
round;
square;
triangular;
diamond-shaped

To find out your face shape, you will need to roughly divide the front of your head into three zones, upper, middle and lower. The ideal is considered to be a proportional oval shape. In all other cases, one of the zones will be more pronounced.

What is facial oval correction? Basic Techniques

Correcting a face means eliminating imperfections by making changes to the size of conditional zones. Several techniques are used to correct disproportionality:

makeup using chiaroscuro technique;
correctly chosen haircut or hairstyle;
matching glasses or jewelry.

Now we will focus on well-executed makeup. To do this, you will need foundations of three main shades, preferably from the same manufacturer, with similar consistencies and textures. The main thing will be a tone that is in perfect harmony with the natural color of the skin, and to help it, a darker and lighter shade.

When choosing, you must remember that all foundations have a base close to pink or yellow. You need to choose products from one palette.

It is important to remember that dark shades make you look smaller, while light shades create an accent, emphasizing. In professional language, products that reduce various parts of the face are called shading, and products for highlighting certain areas are called highlighters.

Corrective makeup, like any other, begins with the application of moisturizers. After absorption, apply foundation natural shade, and to visually eliminate imperfections, a darker tone is used. Borders between different colors it is necessary to shade carefully so that facial features look more natural and attractive. If contouring is done incorrectly, it will appear that the face was drawn out using a ruler.

Professional makeup involves the use of blush to give the face freshness and radiance. For a natural look, blush of the same tone with a natural blush is suitable. They are applied to the protruding parts of the cheekbones, emphasizing the dignity of the skin.

Required Tools

The ideal assistants in creating makeup are brushes and sponges. A properly selected brush should have dense, thick bristles and a pointed end. Using the tip, take a small amount of cream of a darker shade and apply it to the skin.

Sponges come in a variety of shapes and materials. The natural one absorbs cream less and when dry is similar to pumice, while the foam rubber one, which has small pores, is no less convenient to use. To apply foundation, you need a soft and slightly moisturized foundation. Application is done by patting.

Oval face correction

This type rarely needs any form changes. Sometimes only the oval visually seems a little more elongated. Then you will need to apply a small amount of darkening product to the top of the forehead and chin area.

Round face correction

With a round face, the task of competent correction is to visually lengthen and stretch out the contours. You will need to work on shading on the cheekbones, temples and sides of the oval. Highlighter is applied on the chin, under the eyes and in the center of the forehead, and blush is applied along the cheekbones.

Correction of a rectangular face

Outlines rectangular face need smoothing, for which a dark palette is used in the sharp corners of the forehead and on the chin. The bridge of the nose, the central part of the forehead and the area under the eyes are highlighted. Blush is applied to the apples of the cheeks and cheekbones.

Square face correction

With this type of face, it is necessary to visually narrow the oval, rounding the cheekbones. Shading is applied to the entire side contour of the face, and the same parts are highlighted as for the rectangular one. The blush is applied in the form of a triangle to the cheekbones and carefully shaded.

Triangular face correction

A distinctive feature of such a face is a narrow chin and wide forehead. To give it correct form, you need to darken the corners of the forehead and cheekbones from the top of the ears to the center of the cheeks. The light tone is applied to the center of the forehead, the area under the eyes and the contours of the jaw. Blush applied to the apples of the cheeks adds radiance.

Diamond face correction

On such a face, it is necessary to correct the contours of the prominent cheekbones by applying a foundation of a darker shade to them. The highlighter is applied to the central part and corners of the forehead, chin and jaw contours, and the area under the eyes.

A few secrets of perfect correction

First of all, highlighting shades are applied, and then shading.
Highlighter and shading should not be applied in close proximity to each other.
Transitions between shades must be done smoothly and carefully.
Foundations must be applied in small, barely noticeable portions.
At problem skin Mother of pearl should be used carefully so as not to make imperfections more obvious.
It is not recommended to apply mother of pearl to the areas under the eyes.
The ideal effect is achieved only through professionally performed shading.

The final stage of facial oval correction

Facial makeup is set with powder. It must be used wisely and moderately. It must be applied with a special brush to avoid the appearance of an undesirable mask effect. The first, thinnest layer of powder is applied immediately after applying foundation and corrective products, firmly sealing into the base. The final barely noticeable layer serves to fix the result.