Interesting types of sneaker lacing. Fashionable types and lacing techniques for sneakers

Today there are many ways to tie shoelaces on sneakers - and to prevent them from being visible, you need to know how to lace your shoes correctly. For many people, lacing sneakers is not only a way to secure shoes on their feet, but also a means of self-expression. More and more often, teenagers can be seen wearing multi-colored laces, which complement the look and make it even more colorful. Below we will talk about popular methods of lacing shoes that will allow you to hide the bow inside.

Beautiful methods of lacing ends inward

Many amateurs often get their shoelaces untied. To prevent this from happening, there are several proven methods, thanks to which you can not only lace your shoes securely, but also hide the ends inside.

Hidden node

A popular way to tie laces on sneakers without a bow. Step by step technique:

The secret of this method is that the bow is hidden in the inner side of the loops, and in the frontal area only the created pattern is visible.

Tangled Trail

It is considered one of the most difficult methods, but it looks very unusual in appearance. Step by step description:

Just a few minutes and you will look new and very attractive. This method of tying will be useful for those who are used to attracting attention to their person.

Crisscross

A simple method that is especially suitable for . The technique is as follows:

This method is perfect for both men's and women's shoes.

Without a bow

An ideal method for those whose shoelaces constantly come undone. Step by step description:

1. Take the left end of the aglet and insert it into the left hole on the outside of the shoe. With the right end, do the same only on the opposite side;
2. Perform these movements one by one; the ends of the laces can be tied into a knot on the wrong side.

The “No Bow” method allows you to beautifully hide the laces inside the shoes.

With three holes

This method visually lengthens short laces. Step by step description:

1. Take and thread the eglet through the bottom eyelets, leaving the ends inside the shoes;
2. Pull the eglet vertically through the next pair of holes;
3. Cross the ends and insert them into the next holes;
4. Continue doing the same steps until the end. Tie a knot inside the shoe.

The “Three Hole” method is best used only for sneakers with short laces, as well as boots, boat shoes, etc.

Straight lacing

Straight lacing will make the shoes attractive in appearance and will make you stand out among your friends. Step by step description:

Straight lacing will look good on high-top sneakers.

Lace-up with hidden knot

When the knot is hidden inside the shoe, it looks beautiful and attractive:

1. It is recommended to tie sneakers using the straight lacing method. The right end should be longer than the left;
2. The left part of the lace should be left unlaced, and the right part should be brought to the top of the shoe;
3. Pass both parts inside the shoes and tie the laces.

This method is ideal for tying the laces on sneakers so that they are not visible. As practice shows, lacing with a hidden knot is especially popular among athletes.

The video below shows an original method of super-fast lacing without any knot.

Web

The “Spider Web” method has become especially popular recently. Visually, this lacing looks amazing and attracts the attention of passersby. Step by step technique:

On the Internet you can find many photos and videos where users share their secrets of lacing sneakers.

Chess board

This method will require two laces of different colors (for example, orange and blue). To get a good result, you need to practice a lot. Step by step technique:

This type of fashionable lacing is especially often used by skateboarders and cyclists to emphasize their individuality.

Sports

Sports shoes have their own lacing method. When running, the running shoe must hold the foot firmly so that there is no longitudinal or lateral movement. There should be no pain, shoes should not rub or pinch the foot. The laces should be long enough so that they can be tied correctly at the end. Step by step description:

This method will help you calmly and comfortably cover the entire running distance.

Surgical knot

Lacing using a “surgical knot” rarely unties itself, but is considered convenient and practical. How to tie such a knot.

Sneakers and sneakers today are no longer considered exclusively sports shoes. They can be worn every day: put on to work, to church and even to a social event. The original lacing will help to give the not-too-traditional shoes an appropriate look.

How to lace sneakers and sneakers correctly? Are there any canons and rules in this matter? Perhaps after reading this article you will discover a lot of new things. Interesting? Begin...

Historical excursion

Not many people know that shoelaces are considered a fairly new invention and were used extremely rarely until the beginning of the twentieth century. Previously, various fasteners, hooks and buttons were used to hold shoes on the foot. Also very popular were shoes that did not have any fastenings at all.

But the fact is that the laces themselves saw the light of day much earlier. The very first example of a laced shoe found by archaeologists dates back to 3600-3500. BC. There are also some known facts indicating that the ancient Romans, Indians and Greeks used ribbons to hold shoes.

One of the variants of modern laces was also used in Rus'. They were called frills and were used to attach bast shoes to the legs. The material for making the obor could be anything: bast, leather, flax, hemp or wool.

At the end of the 13th century, aeglets saw the light - metal ends for laces, which facilitated the process of getting the ribbon into the corresponding hole.

It is quite difficult, and perhaps even impossible, to name the exact date of the appearance of the laces. But the official patent for this invention has completely precise time coordinates. It was received in England at the end of March 1790 and registered to the Irishman Harvey Kennedy. Subsequently, this gentleman made a considerable fortune on laces, and the Mr. trademark. Kennedy still exists today.

How to lace

Today, thousands of ways of lacing sneakers with 5 holes and other numbers of holes have been invented. Although it may seem that shoe straps are not a necessary element, they can sometimes be very difficult to live without. Tight and beautifully tightened lacing allows the ballet shoes to stay securely on your feet. Once you loosen the weave or untie the knot, your leg will easily be free.

Lacing sneakers with 5 holes is a completely individual matter. Here you can fully express your artistic taste and show real creativity. For weaving, it is absolutely not necessary to use traditional dull laces. To create the desired look, multi-colored braid, silk and guipure ribbons, multi-colored elastic bands and twisted threads are quite suitable. You can use materials of completely different colors and textures. Bright and beautiful lacing of sneakers with 5 holes will help you create your own individual look, look stylish and original.

Methods for tying shoelaces

This may seem strange to some, but even such a tedious process as tying shoe straps can be turned into a super exciting activity. There are a huge number of lacing options for 5-hole sneakers. Which one to choose depends only on your desire and the amount of time you are willing to devote to the process. For example, the following options are possible:

• straight;
• spiral;
• double reverse;
• "butterfly";
• nodal;
• with cross weave;
• with or without a bow;
• "saw";
• "ladder";
• Roman;
• European;
• hiking... and several thousand more options.

The main thing is to adhere to the basic rule: lacing sneakers with 5 holes should not only be beautiful and original, but also as comfortable as possible. Shoes should not fit too tightly on the foot, but looseness is also unacceptable. The knots should be tightened more tightly, and in some cases it is better to hide them completely inside.

Women's and men's types of lacing

This may seem strange, but the types of lacing of sneakers (shoes with 5 holes or 10 - it doesn’t matter) can also be divided by gender. Of course, this does not mean that a guy cannot like “female” lacing, and a girl will not like the strict English style. But priorities still exist.

The most classic example of “female” lacing is the “butterfly”. It received this name because on the front part of the leg such weaving looks like several independent crosses. Outwardly, it resembles a men's bow tie. Hence the name. To lace sneakers like this (with 5 holes), you don't need a diagram. Everything is very simple: the ribbons are crossed on the outer part of the shoe, and on the inside they are threaded vertically:

1. The lace is threaded through the two lower parallel holes and pulled inward on both sides.
2. Each end is pulled into an adjacent parallel hole and brought out.
3. Now the ends of the lace intersect, forming a cross, and are pushed from top to bottom into the next row of holes.
4. Repeat steps 2 and 3 until the holes run out.

This lacing is quite comfortable and gives women’s legs a lot of freedom and space.

The most classic “men's” lacing is considered to be straight English lacing. This is how the famous Oxfords are laced - the stylish closed shoes of English aristocrats. Since such weaving is intended exclusively for an even number of holes, we will not consider it in this article. After all, we are interested in lacing sneakers with 5 holes.

To demonstrate another type of traditionally masculine option, you can use military lacing. This is how military personnel from many countries tie their boots and combat boots. It is also suitable for sneakers. It is very simple to perform - this is the opposite of the “butterfly”. That is, all actions need to be done in reverse. Lacing begins from the bottom holes from the inside out. If you did everything correctly, you will get crosses on the inside, and on the outside you will see dotted lines running parallel to the leg.

Original weaving patterns

There are many ways to tie your shoelaces beautifully. A review of the diagrams presented in this article will help you learn at least a little about this art. However, this does not mean that you cannot invent your own weaving pattern. All in your hands.

One of the most popular weaving options is “zipper”. It got its name because of its external similarity to a traditional zipper. The scheme is not very easy to implement, but the result is worth it:

• A fairly long cord needs to be pulled through the lower holes and the ends brought out.
• Now both ends need to be passed under the resulting crossbar (screed) and passed crosswise from the inside through the holes of the next level.
• Again we pass the ends under the screed of our level, cross them and insert them from the inside into the holes at the next level.
• We repeat the operation until the holes run out.

This lacing looks quite original and is suitable not only for sneakers, but also for many other types of shoes.

For those who don't like knots

For those who frequently and for a long time play sports, the load on their legs is immeasurably higher than for ordinary people. Athletes tend to have wider feet and their feet are more likely to swell. Therefore, for comfortable training, it is better to avoid lacing with frequent crossing of the ribbons. In some sports, it is recommended to use lacing of sneakers without tying them (5 holes or more in them does not matter).

There are also people who hate tying knots. Well, without this, sneakers, as you know, come untied. Do you think so too? You're just not familiar with lacing, which can literally be done with one hand! It's easy to do this:

• Take a long cord and tie a large knot tightly at one end. You should end up with something like a thread and a needle. The role of the needle in this case is played by the aglet at the other end of the lace.
• Now insert the structure into any upper hole of the sneaker and make sure that the knot does not slip through it.
• Use the long end of the lace to “sew” the sneaker over the edge, threading the lace alternately through the diagonally located holes to the very bottom.
• As a result, you should get two types of ties: diagonal on the inside and closed parallel on the outside.

You will be left with a long loose end of the lace in one of the bottom holes. Simply pull it from the bottom up between the weave threads. Now, in order to “tie” the straps, just pull the free end and hide it inside the sneaker.

Colorful beauty

The coolest lacing for sneakers (with 5 holes, although the more holes the better) comes from ribbons of different colors. The so-called chess pattern looks very original. To do this weaving, you need to take two long laces of different colors, preferably flat and wide.

Using one color (primary), lace the sneakers with regular straight lacing. Now take a ribbon of a contrasting color and thread it in a wave-like manner from the bottom up, pushing it under or over the main weave. Once you reach the top, wrap the end around the main weave and work in the opposite direction. Repeat the above steps until the additional lace runs out. Fasten the ends and hide inside the main weave.

If you did everything right, your sneakers will look like a multi-colored chessboard.

Bright, simple and fast

And here is another way of double multi-colored lacing. It will also require two types of ribbons in contrasting colors.

Take your primary color of twine and lace the sneaker in the usual criss-cross fashion, skipping every even row of holes.

Now thread the ribbon of an alternative color in the same way into the remaining free holes.

How to knit and hide knots

Lacing sneakers with 5 holes will not be strong and reliable unless you tie a strong knot at the end.

Weaving knots, including on sneakers, is an art. The simplest and most accessible way is the notorious “bunny ears”, which kids learn to knit at the age of three. However, this method cannot be called too reliable.

The basis for various variations of weaving is the often used reef knot. Its essence lies in the fact that one end is braided with the other, first from above and then from below. Such a knot is held incredibly tightly, but at the same time it is not difficult to untie it. Simply pull the ribbons in different directions.

Most often, roller or figure skates, ski boots and other similar shoes are laced with such knots.

There are also several types of weaves in which the knot is located on the side, inside or in the middle of the sneaker. The first one is most often used by those who walk a lot in the mountains or through thickets. The “side” knot is very easy to hide inside the shoe, and it will not cling to branches and thorns. The second method is popular among athletes, and the third is very respected by bikers.

Lacing for racers

Although this method is more suitable for real racing boots than for running shoes, let's look at it:

• A long cord is passed diagonally through the upper right and lower left holes.
• Using the upper end of the lace, we “sew up” the diagonal holes over the edge, going down to the middle.
• We perform the same operation with the lower end of the lace, rising from bottom to top.

This weave tightens or weakens exclusively the midfoot. On sneakers it will look original, but lacing does not pose much practical load.

How to lace if there are many holes

The vast majority of lacing types require shoes to have an even number of holes. What can those who are a little unlucky with this do?

Here you can offer several options. For example, you can simply ignore one lacing hole at the bottom or top. Quality most often does not suffer from this. The shoe continues to stay firmly on the foot.

Some types of lacing will not change much in appearance if you skip one of the holes in the middle of the weave. And, of course, you can spend a little time and find original types of lacing designed for sneakers with 5, 7 or other odd number of holes.

Show a little imagination - and your friends will rightfully call you the most creative and stylish person.

Sneaker lacing is an important element of equipment. Improperly laced sneakers can cause blisters, black nails and other problems. Many runners, especially marathoners, face these ailments. We have collected the most proven methods for lacing sneakers and tying shoelaces. Read, choose the option for your foot and make your sneakers more comfortable.

How to lace your sneakers correctly?

The lacing should hold the foot tightly so that there is no unnecessary movement of the foot. At the same time, do not put pressure on the incision and do not interfere with blood flow.

How do you know if your sneakers are laced correctly?

• the heel is fixed
• the foot sits tightly, does not move left and right
• the blood flow is not compressed during the ascent

Sneaker lacing options

Top 6 lacing methods that will make sneakers more comfortable.

Lacing into the last holes of the sneakers

The last holes in the sneakers are designed to provide a tighter fit to the foot. You don't need to use them on walking shoes, but for running we recommend that you always lace up using these holes. Using this method, the problem of a “walking” heel is solved.

Pay attention to the final part. After the usual knot, another knot is made from bows. This is the easiest way to avoid laces coming undone while running, but it's not the most effective. At the end of the article, we have selected the 4 best ways to tie your sneakers.

Lacing method for wide forefoot

Suitable for those with wide feet in the toes. Gives the shoe a little fat in the front and a secure fit in the middle.

Lacing type for wide feet

Makes the sneaker looser throughout the entire instep. Suitable for those with wide feet. Can be comfortable with orthopedic insoles for flat feet.

Lacing option for narrow feet

Special models of sneakers are produced for those with narrow feet, but they are not always available. Try this type of lacing if the sneakers are the right length, but your foot wanders.

Lace-up for high rise

Suitable for hypopronators and those with high arched feet.

Lace-up for free fingers

Your toes should move freely in your sneakers. If this does not happen, this lacing is for you. Also suitable for those with a long middle toe.

How to tie laces on sneakers?

Lacing correctly is half the battle. Now you need to tie it securely. We have selected 4 reliable ways to tie shoelaces.

A strong version of a regular knot

Video from ted.com with translation into Russian.

A simple, fast and reliable way to tie your shoelaces

Modified bow. It ties quickly and does not come undone on the go.

Double knot with bow

This method is suitable for those who make 2 loops and tie them with a knot. A more durable option.

Surgical sneaker knot

A “surgeon’s knot” is a familiar way to tie shoelaces, but with an additional loop. Much more reliable.

Play sports, move, travel and be healthy!
If you find an error, a typo, or you have something to discuss, write in the comments. We are always happy to communicate. 🙂

Is there a person who does not have a single pair of sports shoes? Surely not.

But did you know that beautiful and original lacing can change shoes almost beyond recognition. After all, lacing is not only a means of holding shoes on the foot, but also a stylish accessory. Or rather, it can become one if you approach the process creatively.

We offer you several methods of lacing sneakers that will help highlight your style and individuality.

How to lace shoes beautifully and correctly using standard methods?

Without a bow

Many lovers of sports shoes admit: “I’m pretty tired of the bow and want something different.” However, most people want to stick with traditional sneaker lacing methods.

Classic lines

To do this, do the following:

1. Pass the left end into the left hole from the wrong side, and into the right hole from the front side, so that you get a straight line on the outside.
2. The same is done on the right side. Repeat the actions one by one.

With this technique, the bow will be hidden inside.

Criss-cross "over-under"

How to do it:

1. Thread both ends into the lowest eyelets (holes) from the outside.
2. Then the laces are crossed inside and threaded through the following holes (the ends of the laces are on the outside).
3. After which they are repainted again and threaded through the holes (the ends are inside). Further, internal and external crossing alternate.
4. At the end, a knot is tied and hidden so that the lacing looks beautiful.

A prerequisite is that the sneakers must have an even number of holes.

Display

Reminiscent of the classic method with some modification. When performing, one end of the lace is laid in a zigzag pattern from bottom to top. The same is done on the other side.

The result is cross-shaped lacing with crosses of different sizes.

With a bow

Butterfly

It all depends on the number of holes:

1. If the number is even, the ends of the laces are threaded inward at the first stage; if the number is odd, vice versa.
2. After this, the ends of the lace are passed through the next hole from the inside (without crossing).
3. They are then crossed on the outside of the shoe and threaded through the holes again from the outside to the inside.
4. The second and third stages are repeated. The result is that beautiful butterflies are formed on the outside.

The method is more suitable for women.

Cobweb

It is advisable to use this method for a large number of holes:

1. The lace should be threaded through the lower ends on the outside.
2. Then the ends of the lace are crossed and threaded into the 4th pair of holes (the ends are on the inside). In this case, two pairs of holes are passed through.
3. Now you should lower the laces along the inside of the sneaker to the second pair of eyelets and pass through them from the inside to the outside.
4. Then the ends are threaded through 5 pairs of holes and the procedure is repeated.

Traditional criss-cross method

To do this, the lace is threaded through the lowest holes (ends on the outside). Now they should intersect and enter the next pair of holes from the outside.

The advantages of the method are simplicity and the ability to adjust the tension.

Attention! Before you start lacing, be sure to put on the sneakers and feel how they fit on your feet. This will help you understand which lacing is right for you, as well as adjust the tension of the lace.

Unusual and fashionable methods

Checkered

It looks stylish and modern, it looks especially original when using two colors. Disadvantage: it doesn’t tighten the leg well. To complete this you will need two pairs of laces, preferably of different colors.

How to do it:

1. Lace the sneakers using the “Classic Lines” method without a bow.
2. The second lace should be passed through the first in a wave-like manner, so that checkers are formed.
3. Having reached the top of the lace, wrap it and repeat the action from top to bottom.
4. When done with two colors, the result resembles a chessboard.

Lightning

A sophisticated, creative and safe method, the shoe fits firmly on the foot.

To do this, both edges of the lace should be threaded into the lower eyelets from the inside to the outside. After which they are wrapped by the stitch (at the same level), crossed and threaded through the 2nd pair of holes in the direction from the wrong side to the front side.

Then the ends are again wrapped behind the stitches of their level, crossed and the process is repeated again.

Railway

The method is durable and safe:

1. To do this, you need to thread the ends into the holes from below, so that both of them are on the outside.
2. Then the right edge of the lace is inserted into the right hole in the second row, and the left edge into the left one, now they should be inside.
3. After which the ends are crossed and reinserted into the same holes.
4. The right tip ends up in the left hole of the second row, and the left tip ends up in the right hole. Then everything repeats itself.

Double helix

It's very simple to do and looks beautiful.

To do this, the lace is threaded through the lowest eyelets (one tip is on the outside, the other on the inside). The outer end is threaded into the opposite hole of the next row, the inner end in exactly the same way. The process is then verified.

Reference! Lace the right and left sneakers as if in a mirror image, then the shoes will look more symmetrical.

Reverse two-color loop

To do this, a lace of the same color should be threaded through one bottom hole from the inside out, and the same is done with the second. The ends are connected and hidden.

After this, the red lace is threaded through the holes on one side (while leaving free loops), the same is done with the yellow lace, while threading it through the loops on the other side. A bow is tied on top.

The length and symmetry of the loops can be adjusted.

Five pointed star

It looks very unusual and a little shocking:

1. When doing this, the lace is threaded through the third hole, turning it from the outside to the inside.
2. The edges of the lace are then passed along the inside of the shoe and pulled into the bottom holes from the inside out.
3. The ends are crossed and again inserted into the 3rd grommet from the top from the outside to the inside.
4. Now the left edge should be placed in the upper left hole from the inside out, and then inserted into the upper right hole.
5. The right tip is passed along the inside of the sneaker and threaded into the lowest hole from the inside out.
6. It should also be passed under the stitches (the third hole from the top on the right side), and hooked onto the top stitch (this is the top of the star).
7. After that, repeat the same on the left side, thread the end into the lower left hole and pull out the lace.

The last step is threading the same end into the upper left grommet from the inside to the outside.

Tightened loops

Perfect for young and creative girls, it looks impressive on white sneakers combined with dark laces.

How to do it:

1. The lace is threaded into the 2nd hole from above so that both ends are the same in length.
2. Then thread each tip into the holes on the right and left, respectively, so that long, loose loops are formed on the outside.
3. There should be one hole left free on both sides at the bottom.
4. Now pass the ends through the resulting loops (long ones), so that both “look” outward.
5. The right edge of the lace must be threaded through all the loops on the left side (from bottom to top), then it must be threaded into the upper right hole. The same is repeated on the left side.

Attention! If the shoes are used for running, use all holes when lacing to avoid injury.

• When tying a knot, tuck your toes as much as possible to avoid over-tightening.
• Sneakers should always be laced to the last hole to avoid injury.
• Remember, synthetic laces always carry a risk of injury.
• When securing, use a double slip knot to minimize the likelihood of injury.
• If you have narrow feet, use the zigzag technique. The foot should be as tight as possible.
• If you have wide feet, all varieties of classic “criss-cross” style techniques will suit you.
• For high insteps, use horizontal types of lacing.
• Always check the strength of the knots immediately before training.

You should know that lacing on sneakers should not only be stylish, but also comfortable and safe.

At the same time, sports shoes should not put too much pressure on your feet. This will lead to disruption of the blood supply to the foot and venous outflow, leading to swelling of the feet, fatigue and pain in the legs. At the same time, shoes that dangle on the foot are a risk of injury.

Remember, the safety of sports shoes comes first, and lacing plays a paramount role here.

This article will answer a question that worries many: how to beautifully lace up sneakers or sneakers and look modern and impressive. Today, sneakers and sneakers are such a common and popular type of footwear that many people wear them all the time. However, not everyone knows that tying shoelaces correctly is important not only from the point of view of the convenience of wearing shoes. Today, a lace is also an element of your style, and the way you tie it is a certain message, a reflection of your self.

Make your shoes brighter, lace up with imagination!

How to beautifully lace sneakers or sneakers

Since childhood, everyone has known a way to lace shoes: a cross-bow with two loops called “bunny ears.” But it turns out that the textbook scheme is far from the only one. How else can you tie up your favorite sneaker, boot or sneaker in a fashionable, stylish and impressive way? It turns out that there are so many methods and schemes that it’s easy to get confused. We will show the simplest, the most popular, the most complex, and the most extravagant. The choice is yours!

Advice: Please read our step-by-step instructions carefully and study the attached diagrams. Otherwise you will have to unlace and start over.

"Zigzag"

The simplest technique. This is how laces are traditionally knitted on almost any pair of shoes: we simply cross them, as if we were knitting a lace.

We thread the lace into the bottom pair from the inside out, installing even ends.

And then we sequentially thread the tip (end) of the lace from inside to outside, moving crosswise upward. At the exit we twist a bow with two loops. “Zigzag” is good because it is comfortable to wear and the owner of the shoe does not risk rubbing his foot, but its disadvantage is that if the knitting is tightened, the lace will spoil the shape of the shoe.

ADVICE: try lacing the right and left sneakers in a mirror image.

"Mirror Zigzag"

The same scheme, with the only difference that we start from the outside-in and wind the lace from the outside or from the inside, depending on where it came out.

"European"

A very original, catchy and uncomplicated way.

Its “trick” is that the end of the lace is alternately inserted “through” the hole, that is, bypassing one and threading into the next one, which is located higher. Let's go: we thread the ends of the lace into the hole from the inside out and begin to weave as shown in the figure - the yellow end makes a horizontal step into the hole opposite, and the blue end is sent diagonally through one hole. Then the action is repeated in reverse order: the blue end builds a step, and the yellow end makes a diagonal. The result is a fancy braid.

ADVICE: all ends are inserted from inside to outside

“Magic ladder”, or “even” method

This scheme works on sneakers with an even number of lacing holes.

Although if your shoes have an odd number, don't worry, just don't fit into the topmost pair of holes. The peculiarity of this method is that all the weaving is done inside, and “magically” only a smooth, neat ladder is visible from the outside. We tuck the ends from the outside to the inside and move up not diagonally towards, as before, but up and through one ring on each side, threading the ends of the lace from the inside out and the ladder opposite.

The “ladder” will suit those who don’t like tight lacing; its tension is easily adjustable.

Simple straight lacing

Variant of the previous scheme

We thread one end into the lower left hole from the outside to the inside and pull it along our side to the top hole and take it out from the inside to the outside.

With the other end we pass all the other holes from inside to outside.

An original and easy-to-implement way to create a neat look for your lacing.

"Open Staircase, or Forest Walk"

We thread the lace into the bottom pair from the inside, setting the ends straight.
We lead the right (yellow) segment up from the outside to the inside, making a parallel from the inside to the outside. We lead the left (blue) segment up from the outside to the inside, bypassing one hole, making a parallel from the inside to the outside. We thread the yellow piece into the fourth hole from the bottom from the outside to the inside, making a parallel from the inside to the outside. We do the same with blue.

ADVICE:this method is good for lovers of both cycling and forest walks: the side bow will never come undone or get caught

"Two-color"

This same type of lacing gives another, very original, variation: for one sneaker we need two different-colored laces. We tie them together and cut the ends so that one of the segments is slightly longer than the other.
Using a purple (longer) cord, we start from the bottom right hole from the inside out, make a horizontal line and also stretch from the inside through the hole, alternating diagonally. The orange lace starts from the second hole from the bottom, makes a diagonal and stretches from the inside through the hole, also alternating diagonals.

"Double two-color"

A simple and very effective way for a pair of multi-colored laces. A regular zigzag, performed sequentially from the two lower pairs of holes.

"Saw"

We insert it from the outside, align the starting segments. The right (yellow) end rises vertically from inside to outside into the next hole and enters horizontally from outside to inside into the hole on the left. The left (blue) end goes diagonally from the inside to the outside into the third ring from the bottom, goes outside and makes a horizontal line from the outside to the inside.
An original, cool, catchy scheme.

"Diagonal, or Shop Lacing"

We send the lace into the bottom pair of holes from top to bottom (outside-inside).
We immediately pull the left (blue) end diagonally into the upper left hole.
The right (yellow) end is sewn with horizontal diagonal stitches through all remaining holes.
An impressive pattern that requires a certain amount of skill and training to achieve the same length of lace at the end.

"Butterfly"

Let's get on from the outside to the inside.
We pass parallel with one stitch up from the inside to the outside, crossing.
Algorithm: from the inside - we cross from the outside. And so on.

ADVICE: a method loved by many women for the feeling of comfort and lightness.

"Military" lacing

“Male”, military version of the “butterfly”: this scheme is adopted in the armed forces of Great Britain, France, Holland, even Brazil.
Strictly and concisely, suitable in cases where the laces are not very long.

"Roman numerals"

Another version of the “butterfly”. We change the algorithm a little and get a great scheme. In the same way, you can “lace up” the numbers XX or II, it depends on the number of holes on your shoes.

"Railway"

This method develops the previous one in that lacing from the inside is done not obliquely, but vertically. Ideal for narrow and flat laces, as you need to thread the holes twice. The lacing system is strong and secure, but difficult to adjust for tightening.

"Trap, or Macrame"

Variant of the previous scheme. For tying it is desirable: long and thin laces, wide holes and patience.
We insert the lace into the lowermost holes from the inside out, and pull it out on equal sides. The left (blue) end goes into the second hole from the bottom from the outside and comes out from the inside, the right (blue) segment repeats the movement on its side. Algorithm: the ends are threaded under each other at the holes and intertwined in the center.

"World Wide Web"

Original decorative lacing is especially attractive for high boots or boots. We start from the penultimate hole from the inside to the outside, go down along our side from the outside to the inside, make a diagonal into the third hole from the bottom from the inside to the outside and hook under another segment with the hole below.

"Lightning"

We insert the lace inside through the bottom pair, bring it out, make a turn-loop and lead it diagonally from the inside to the outside. The other end repeats the algorithm in a mirror version.

ADVICE: The method is common among ice skating and roller skating enthusiasts.

Double reverse lacing

In this pattern, the weaving starts at the top, goes down to the bottom, and goes back up to the top.
We thread the lace from the outside to the inside into the second holes from the top, dividing the segments equally.
We draw both segments downwards diagonally through one hole with two stitches until the very last hole from the outside to the inside. After the bottom, the segments rise up each on their side from the inside and repeat the diagonal stitch, now upwards from the outside to the inside, intertwining counter stitches. The last stage is to thread it from the inside out into the uppermost holes.

"Reverse loop"

In this “braid”, the lace not only passes through the holes, but is also knitted with itself in the center.

We thread the lace into the bottom pair of holes from the inside out and pull out equal parts. Moving upward, each on its own side, the segments intercept themselves with a simple knot and are threaded from the inside to the outside. The disadvantages are that the laces rub and break faster, and the knots often creep away from the center.

ADVICE: This pattern is especially nice with a pair of different colored laces.

"Knot for memory"

A more complicated version of the zigzag. Find the place of the memorable knot yourself, since it can interfere with putting on a sneaker or sneaker. The advantage is also that you can adjust the tightening of the top and bottom.

"Footbag No. 1"

Several different lacings for footbag training

We start with the third pair from the bottom: from the inside to the outside, we pull out the same parts. We lower both ends down along their sides to the bottom pair: outside-in and inside-out. Also on our side we stretch up through the fourth pair from the bottom from the outside to the inside. We make two counter stitches diagonally: from the inside to the outside and from the outside to the inside.

"Footbag No. 2"

The same pattern, only we make a vertical stitch from the outside to the inside on the fifth pair of holes from the bottom

"Footbag No. 3"

The practical purpose of lacing is to make a hole for receiving the ball.

"Mash"

In this combination we do not use two pairs of holes.
We thread through the bottom pair from the inside to the outside, making even sections. We thread it diagonally from the outside to the inside into the fourth pair of holes from the bottom. From the inside, on our side, we lead one hole down from the inside to the outside. Once again we stitch up diagonally into the third pair from the top from the outside to the inside. We pass again from the inside to the outside one hole lower and emerge outside in the top pair of holes.

"Puzzle"

In this pattern, we thread it through the bottom pair from the outside to the inside, making even segments.

The right (blue) end makes a diagonal from the inside-out to the fourth hole from the bottom and returns from the outside-in to one hole (third from the bottom) on the reverse side. The left (yellow) end repeats the algorithm in a mirror manner. Both ends do this operation again.

"Chingachgook"

Here the tying runs in opposite directions to end in the center of the lacing system. We thread the lace into the lower left hole from the outside to the inside and stretch it diagonally to the upper right hole from the inside to the outside. We begin to lace the upper end in a descending pattern: parallel-diagonal. The lower end moves in a mirror manner in an ascending pattern: parallel-diagonal.

"Double, or Checkers"

You need two pairs of short laces, possibly multi-colored.
A simple pattern for those who have a lot of time for daily tying and untying.

"Lattice"

Complex in execution, but very common scheme. Sold only on pairs of shoes with 6 pairs of holes.

Traditional debut: insert the lace through the bottom pair of holes from the inside to the outside, pull out even lengths. We lead the ends diagonally into the fourth pair of holes from the bottom from the outside to the inside. Inside the sneaker, on your side, stretch the segments to the fifth pair from the bottom and lower them with the reverse diagonal to the penultimate pair from the bottom from the outside to the inside. From the inside we pull it up one ring and stretch it diagonally from the inside to the outside through the top pair of holes.

ADVICE: To get a beautiful embossed weave, as in the picture, alternately place one lace on top of another.

"Grid No. 2"

An economical option for short laces.

"5 pointed star"

A cool and very effective lacing quest. in which the two penultimate pairs of holes remain free.

We start from the fourth hole from the bottom: insert the lace from left to right from inside to outside, stretch out even segments. We bring the blue end with a long diagonal stitch to the lower left hole, thread it from the wrong side on our side into the same hole from which we started. Again, diagonally down from the outside to the inside, rising from the inside to the fifth hole from the bottom, pull from the inside to the outside, make a horizontal outside to the inside and emerge from the inside to the outside from the upper right hole. The path of the yellow section is also very winding. From the fourth from the bottom left hole we go down horizontally along the wrong side, thread it from the inside-out into the already occupied hole, make a diagonal up to the blue segment in the fifth pair of holes from the bottom, wrap around it, go down diagonally into the lower right hole, thread it from the outside-in and from the inside we stretch into the far right hole from the inside out.

ADVICE: for a better look, do not forget to braid the intersecting sections.

"Chess"

In this and the next exclusive pattern, bows are not provided at all: but it looks very cool and beautiful!

Scheme for two laces on one shoe. The greatest effect (as in the picture) is achieved if the laces are long and wide. Tie them up. Starting from the lower left hole, pull the yellow cord through all the holes from inside to outside, making an ascending horizontal ladder. Using blue lace, we carefully braid the yellow lace from bottom to top and back. We hide the remaining ends inside.

Hidden knot

Another variation: the knot is hidden inside the sneaker; we need one lace.

We thread the lace into the bottom pair of holes from the inside to the outside, and pull the equal ends. We pull the left (blue) end from the inside to the outside up through one hole, make a horizontal line from the outside to the inside, repeat on the other side. We extend the right (yellow) segment from the inside to the outside through the next vertical hole, make a horizontal line from the outside to the inside, repeat on the reverse side. The two segments are connected from the inside between the first two holes on the left.

It turns out to be a smooth staircase, which is arranged in a mysterious way. This type of lacing will not leave your surroundings indifferent; you will definitely be the center of attention.

"One-handed" lacing

Feature: we knit a knot on the lace inside the shoe.

We start from the top right hole and go all the way to the bottom left hole and pull the free end between the knitting. The correct pattern is when you have narrow holes and tight laces. Feeling of the leg: tighter in the instep, looser towards the foot.

ADVICE: The last 4 “bow-free” ways will probably inspire those who, like James Bond, hated tying their shoelaces.